PSV5000_OwnersManual - 第14页
Introduction ■ Snapshot of PSV5000 - 10 - Data I/O ■ 096 - 0 465 - 00 1C Snapshot of PSV5000 Figure 1: Fea tures of PS V5000. F or a more d etailed ima ge with compone nts labeled, see the Operator’ s Manual. F or compon…
PSV5000 Owner’s Manual - 9 -
Chapter One 1 —
Introduction
This chapter describes PSV5000 and its components,
software, safety and room considerations.
The Automated Programming System (PSV5000 System) is a versatile
production programmer that handles and programs devices in
traditional and fine-pitched packages. These include BGA, FPGA, μBGA,
QFP, TQFP, CSP, TSOP, SSOP, SON, WSON, SOIC
Device technologies supported include NOR and NAND Flash, Micro
Controllers, Serial EEPROM, and the latest e-MMC memories.
The modular design of PSV5000 creates flexibility, allowing you to
optimize to the level of production required by your facility.
The PSV5000 System
refers to the machine,
accessories, and the
software. The word
Machine is used to mean
the physical machine,
not the software.
For example, you might
connect an air supply
hose to the Machine, but
change programming
jobs on the PSV5000
System.
Introduction ■ Snapshot of PSV5000
- 10 - Data I/O ■ 096-0465-001C
Snapshot of PSV5000
Figure 1: Features of PSV5000. For a more detailed image with
components labeled, see the Operator’s Manual. For component
descriptions see Component Descriptions on page19.
Setting the Language
Several other languages are available for the application interface. To
change the language, edit the
C:\CH700\winAH400.ini file as follows:
Touchscreen monitor
which displays real
time processes and
online Help.
E-Stop button on each
side (at front left & right
rear).
Replaceable
programmer modules
Software options
include a Serial
Number Server
Built-in mounts for
optional Tray Feeder
and Tape Output
Module
Clear safety doors
(front and back)
Adjustable feet for
leveling, and wheels
for ease of setup and
relocation.
Light tower displays
machine status
Flexible options for
input & output:
• static tray,
• automatic tray
feeder
• laser marking
• tape out
ESD ground
connection (front)
Mount for a Tape-In
Module (Tape Feeder)
Utility drawer
(front and back)
■ Snapshot of PSV5000 □ Setting the Language
PSV5000 Owner’s Manual - 11 -
1. Opent the ini file in Notepad or UltraEdit. (Do not use Microsoft Word
or other word processor.)
2. Find “Language Settings” section.
3. Add a semicolon to the line for the current language.
4. Remove the semicolon from the line for desired language.
Figure 2: Sample from the winAH400.ini file. The language in this
sample is set to English.
5. Save the file.
6. Restart CH700 Software for the changes to take effect.