PSV5000_OwnersManual - 第21页

■ System Description □ M anuals f or Optional E qui pment PSV5000 O wner ’s M anual - 17 - Figure 6: S ome of the o pti onal equipm ent manu als, from left to right: Laser Mark e r; Au tomatic Tr ay Feeder CB (Tray Stack…

Introduction ■ System Description

- 16 - Data I/O ■ 096-0465-001C

Devices in the programming sockets undergo any or all of the following

processes as determined by the job. These processes are set in TaskLink:

• Continuity check

• ID check

• Erase

• Blank check

• Program

• Verify programming

• Read

• Illegal-bit check

• Functional verification operations

• Secure device

• Verify options such as voltage

(Optional) Mark devices—

When available, devices that pass the programming and verification

operations are marked at the Laser Module for identification.

3. Load devices into the output media—

Devices are moved by the PNP head to output media: trays, tubes, or

tape. Devices that fail one of the programming processes are placed into

the reject bin or reject tray.

Input and Output Options

PSV5000 System input and output options are: static tray (manual), tray

feeder (automatic), tube, and tape.

Most combinations of input and output options may be used. For

example, the PSV5000 System can be configured with input as static

tray and output as taped.

Manuals for Optional Equipment

The manuals that came with any optional equipment on your system

contain additional, more in-depth information. Some of the manuals

came in hard copy format with your PSV5000 System. Others are PDFs

installed on the Handler computer.

■ System Description □ Manuals for Optional Equipment

PSV5000 Owner’s Manual - 17 -

Figure 6: Some of the optional equipment manuals, from left to

right: Laser Marker; Automatic Tray Feeder CB (Tray Stacker).

Introduction ■ System Description

- 18 - Data I/O ■ 096-0465-001C

PSV5000 Specifications

Specifications are without optional equipment.

FACILITIES

Supply Air Pressure clean, dry, oil‐free air at

5.5–

8.2 Bar (551–827 kilopascals)

(80–120 PSI)

Air Flow 85 liters/minute (3 CFM)

maximum air flow

AC Input Voltage 208–240 VAC, single phase

AC Input Frequency 50–60 Hz

AC Input Power (max) 15 Amps (with all options)

PSV5000 DIMENSIONS

Length, x-axis (including

monitor)

130 cm (51 inches)

Width (including monitor)

87 cm (34 inches)

Height: machine (doors closed)

then add [light tower]

153 cm (62 inches) +

[56 cm, 22 in.]

Weight (no optional

equipment), approximate

450 kg (1000 lbs.)

Environment

Operating Temperature

Hours required for

temperature stabilization

+13° to +32° C (+55° to +90° F)

8 hours after transportation

Relative Humidity 35% to 90% non‐condensing

Sound level 75 dB or less

OTHER

Handler PC Operating System Windows 7 OS, 32-bit

Monitor 15 inch TFT Touchscreen

Since the monitor arm rotates, length and width dimensions can be

adjusted

inversely, up to 10 cm (4 inches). For example, if you sub‐

tract 10 cm from

length, then add 10 cm to width.