PSV5000_OwnersManual - 第29页

■ Software □ Optional Equipment Descriptions PSV5000 O wner ’s M anual - 25 - Software Softwar e resides in the Han dler Computer . The pr imary log - on for the Handl er Compu ter is Micro soft Cl ient. T he cu rrent op…

Introduction ■ Machine Components

- 24 - Data I/O ■ 096-0465-001C

empty pockets on the carrier tape. The carrier tape advances through

either a heat seal or pressure seal unit that applies cover tape to the

carrier tape.

■ Software □ Optional Equipment Descriptions

PSV5000 Owner’s Manual - 25 -

Software

Software resides in the Handler Computer. The primary log-on for the

Handler Computer is Microsoft Client. The current operating system (at

time of this publication) is Windows 7.

CAUTION: Possible machine damage! Adding software to the

PSV5000 System can cause damage or cause the system to

operate improperly. Adding software without specific instruction from Data

I/O Customer Support will void the warranty and may incur service

charges if subsequent service is required.

CAUTION: Possible machine damage! Microsoft Windows system

parameters and network parameters should not be changed

unless instructed to do so by Data I/O Customer Support. Changing

parameters can cause failure and/or damage to systems or cause improper

programming.

SUPPLIED SOFTWARE

The PSV5000 System should never have other software added without

consulting with Data I/O Customer Support.

ANTIVIRUS SOFTWARE

Customer-supplied antivirus software can be installed on the Handler

Computer and is recommended.

CAUTION: Possible loss of support or time! Check with Data I/O

Customer Support to ensure that your software is compatible with the

programming system, otherwise the warranty may be voided.

Ensure that the antivirus software does not scan during a job run.

STATISTICAL PROCESS CONTROL SOFTWARE

Customer-supplied Statistical Process Control software can be installed

on the Handler Computer. See Statistical Process Control Software on

page 73 for more information.

Introduction ■ Software

- 26 - Data I/O ■ 096-0465-001C

Job Creation Software for FlashCORE

TaskLink™ for Windows

is Data I/O’s versatile application for creating

jobs to run on the PSV5000 System with FlashCORE programmers.

TaskLink resides on the Handler Computer.

Figure 12: TaskLink’s main window displays the selected

programming system. Jobs created or edited will be for this

system.

TaskLink online Help is available by clicking Help > Help Topics. It offers

procedural steps as well as general information.

Figure 13: TaskLink online Help. It includes update instructions.

Job Creation Software for LumenX

Job Runner and Job Creator are Data I/O’s latest applications for

creating and managing jobs to run on the PSV5000 with LumenX

programmers. The software resides on the Handler Computer.

Updates and Algorithm Support

Updates, includes algorithm updates, are generally acquired through

our APS Agreement (Annual Programmer Support). See APS Agreement