Maintenance Manual - 第161页

AV131 MAINTENANCE MANUAL 7.8 Par t Supply Unit D79MEC- Z5-000- A0 7.8- 4  Oiling Perio d No . Item T ask Oilin g vol ume Descrip tion 1. LM gui de for 90 ° rot ati on chuck (4 areas) 2. LM guide f or i nserti on unit tr…

100%1 / 244
AV131
MAINTENANCE MANUAL
7.8 Part Supply Unit
D79MEC-Z5-000-A0
7.8-3
7.8.2 Transfer Chuck
Unit No. N610052073AA
Inspection
Period No. Item Task Description
a. Groove cam
Make sure that the groove cam slides smoothly and
there is no abnormal noise at the joint.
Daily
b. Piston & chuck
Remove dirt or dust.
4. LM guide for sliding the
chuck back and forth
1. LM guide for 90°
rotation chuck
2. LM guide for insertion unit
transfer
3. LM guide for sliding the
chuck vertically
10. Spring support pin
b. Piston & chuck
a. /5. Sliding surface of the
groove cam
9. Sliding surface of
the cam follower
8. Sliding surfaces between the
pin and the chuck (4 areas)
8. Sliding surfaces between the
pin and the chuck (4 areas)
7. Lever support
6. Lever support
7. Lever support
AV131
MAINTENANCE MANUAL
7.8 Part Supply Unit
D79MEC-Z5-000-A0
7.8-4
Oiling
Period No. Item Task
Oiling
volume
Description
1.
LM guide for 90°
rotation chuck
(4 areas)
2.
LM guide for insertion
unit transfer
3.
LM guide for sliding the
chuck vertically
4.
LM guide for sliding the
chuck back and forth
0.1 cm
3
Position: Sliding surface
5.
Sliding surface of the
groove cam
Position: Grease nipple
6. Lever support
7.
Lever support
(2 areas)
Every
other
week
8.
Sliding surfaces
between the pin and
the chuck (4 areas)
9.
Sliding surface of the
cam follower
Position: Sliding surface
3
months
10. Spring support pin
0.5 cm
3
AV131
MAINTENANCE MANUAL
7.9 Anvil Unit
D79MEC-Z4-400-A0
7.9-1
7.9. Anvil Unit
D79MEC-Z4-400-A0
7.9.1 Upper Anvil
Unit No. N610052020AA
Inspection
Period No. Item Task Description
Make sure that the tip of the cutter & clincher blade is
not worn or damaged.
a. Cutter & clincher
Make sure that the cutter & clincher moves smoothly
without abnormal noises.
Daily
b. Clinch base
Make sure that the tip of the clinch base blade is not
worn or damaged.
c. Ball screw
d. LM guide
Remove dirt or dust.
Every
other
week
e. Waste intake
Remove any wastes.
Oiling
Period No. Item Task
Oiling
volume
Description
1. Lever support
2. Roller (2 areas)
1 to 2
drops
Position: Support unit
3. LM guide (2 areas) 0.1 cm
3
Every
other
week
4. Ball screw
0.5 cm
3
Position: Sliding surface
2. Roller
a. Cutter & clincher
d / 3. LM guide
b. Clinch base
1. Lever support
c / 4. Ball screw
d / 3. LM guide
Detailed view of lever