Maintenance Manual - 第165页
AV131 MAINTENANCE MANUAL 7.9 Anv il Unit D79MEC- Z4-400- A0 7.9- 4
AV131
MAINTENANCE MANUAL
7.9 Anvil Unit
D79MEC-Z4-400-A0
7.9-3
7.9.3 Automatic Correction Unit
Unit No. N610052084AA
Inspection
Period No. Item Task Description
a. Protective glass
Monthly
b. Projector
Remove oil or dust.
a. Protective glass
b. Projector
AV131
MAINTENANCE MANUAL
7.9 Anvil Unit
D79MEC-Z4-400-A0
7.9-4
AV131
MAINTENANCE MANUAL
7.10 Cutter Unit
D79MEC-Z5-200-A0
7.10-1
7.10. Cutter Unit
D79MEC-Z5-200-A0
7.10.1 Tape Cutter
Unit No. N610052014AA
Inspection
Period No. Item Task Description
Daily a.
Component detection
sensor
Remove oil or dust.
Weekly b. Cutter condition check
Check it by cutting a piece of paper.
Oiling
Period No. Item Task
Oiling
volume
Description
1.
Sliding surfaces
between the guide and
the slider (left/right)
0.3 cm
3
each
Inject grease through the oil holes (× 4)
using a grease gun fitted with a P-type
attachment. (from Z axis side on the back)
2. Bush support pin
0.3 cm
3
each
Position: Grease nipple
3. Roller follower
0.5 cm
3
each
Position: Roller surface
4.
Sliding surface of the
roller follower
0.5 cm
3
Every
other
week
5.
Sliding surfaces
between the guide and
the roller follower
(top/bottom)
0.3 cm
3
each
3. Roller follower
4. Sliding surface of the
roller follower
5. Sliding surfaces between the
guide and the roller follower
(top/bottom)
2. Bush support pin
a. Component detection
sensor
1. Sliding surfaces between the guide
and the slider (left/right)
b. Cutter condition
check