Maintenance Manual - 第238页

AV131 MAINTENANCE MANUAL 11.1 M aterial Saf ety Data Sheet D79MEC- 4E-010-A 0 1 1. 1-23  Precautions in Ha ndling and St orage  Handlin g 59. 1. When handli ng m ore t han t he specifi ed a m ount , handle the product …

100%1 / 244
AV131
MAINTENANCE MANUAL
11.1 Material Safety Data Sheet
D79MEC-4E-010-A0
11.1-22
11.1.11 Mobil SHC 632
Oil name: Mobil SHC 632
Manufacturer’s name: Exon Mobil Corporation
First Aid Measures
Eye contact
Immediately flush with plenty of clear water. Consult a physician.
Skin contact
Flush contacted areas abundantly with soap and water.
Inhalation
Remove to fresh air.
Warm with blankets or other means and repose. Consult a physician if necessary.
Ingestion
Do not induce vomiting. Promptly consult a physician.
Wash out mouth with water.
Fire Fighting Measures
How to extinguish
57.
1. Put out the sources of fire.
2. For fires at earlier stage, use dry chemical or carbon dioxide to douse.
3. For large fires, it is effective to use fire foam to block off air.
Water spray can spread fire and hazardous situation may result.
4. Spray the surrounding equipment with large amounts of water to cool.
5. Approach from upwind of fire and wear protective gears.
6. Prevent unauthorized entry to the fire area.
Fire extinguishing agents
Loaded stream fire extinguisher, foam, dry chemical and carbon dioxide.
Do not use water jet.
Accidental Release Measures
Remove the sources of ignition.
58.
1. Large leak: Evacuate the nearby area and rope off the area to prevent entry.
Be sure to wear protective gears. Stop the leaked grease with sand, etc. and lead to a safe place, then
collect it in an empty container. Be careful not to allow oil to enter drains or water courses.
2. Small leak: Collect the leaked grease in an empty container by removing with a spatula or shovel or by
adsorbing with sand or waste cloth, etc. Then wipe up completely with a waste cloth.
3. Leak on the sea: Deploy oil booms to prevent spreading. Scoop up or soak up with absorbing mat.
Chemical adsorbent must comply with the technical requirements of the regulations of relevant authorities.
4. In the event of a leak, report it to local authorities immediately to prevent fires or accidents from occurring
or spreading.
AV131
MAINTENANCE MANUAL
11.1 Material Safety Data Sheet
D79MEC-4E-010-A0
11.1-23
Precautions in Handling and Storage
Handling
59.
1. When handling more than the specified amount, handle the product in a location of manufacture or
warehouse that meets the standards required by the law.
2. Prevent contact with flames, sparks or hot objects and do not evaporate needlessly.
3. Handle at room temperature. Avoid entry of moisture or foreign substances.
4. Take measures against static electricity and wear conductive clothing and boots.
5. Vapors generated from petroleum product often stay in the air because vapor is heavier than air. It is,
therefore, necessary to ventilate the workplace and to keep away from flames.
6. Before repairing or modifying the machinery and equipment in which hazardous substance remains,
eliminate the substance completely in a safe place.
7. Do not eat or drink.
8. Wear appropriate safety gears to prevent contact with skin or eyes.
9. If mists are generated, wear a respirator so as not to inhale them.
10. Use a pump etc. to draw from the container. Do not take a suck on a tubule.
11. Keep containers tightly closed.
Storage
60.
1. Store in a well-ventilated place where not exposed to direct sunlight.
2. Label as a hazardous material.
3. Avoid contact with heat, sparks, flames and buildup of static electricity.
4. Electric appliances used in the storage place should be explosion-proof and need to be grounded.
5. Avoid contact with halogens, strong acids, alkaline materials or oxidizers.
Handling of container
61.
1. Do not pressurize empty containers. Doing so can cause explosion.
2. Do not weld, heat, drill or cut containers. Residue can catch fire with an explosion.
Disposal Consideration
62.
1. Business owners should dispose of industrial wastes by themselves, or entrust the disposal to the
specialists approved by the governor or to the local authorities responsible.
2. Do not dump into any sewers, on ground, or into any body of water.
3. Burn in an incinerator before disposing of in a landfill. Burnt residue must be below the criteria stipulated in
the law on waste disposal and cleaning.
4. Burn in a safe place in a manner where there is no possibility of hazard to others or damage to properties.
A guard must be placed.
AV131
MAINTENANCE MANUAL
11.1 Material Safety Data Sheet
D79MEC-4E-010-A0
11.1-24
11.1.12 Turbine 32
Oil name: Turbine Oil 32
Manufacturer’s name: Nippon Oil Corporation
First Aid Measures
Inhalation
Remove to fresh air.
Warm with a blanket or other means and repose. Consult a physician if necessary.
Skin contact
Flush the contacted area with water and soap.
Eye contact
Flush with plenty of clear water and consult a physician.
Inhalation
Do no induce vomiting. Promptly consult a physician.
Wash out mouth with water.
Simple descriptions on most common symptoms
Swallowing may lead to diarrhea or vomiting.
Contact with eyes may cause inflammation.
Contact with skin may cause inflammation.
Ingesting the mist may cause to fall ill.
Fire Fighting Measures
Fire extinguishing agent
63.
1. Loaded stream fire extinguisher, foam, dry chemical and carbon dioxide.
2. For the fire at earlier stage, use dry chemical or carbon dioxide to douse.
3. For large fires, it is effective to use fire foam to block off air.
Things should not be done
Do not use water spray. It can spread fire and hazardous situation may result.
Specific fire fighting measures
64.
1. Put out the sources of fire.
2. Spray the surrounding equipment with large amounts of water to cool.
3. Evacuate unauthorized entry to fire area.
Protection for fire fighters
Approach from upwind of fire and make sure to wear protective gears.
Accidental Release Measures
Precaution for human body
Make sure to wear protective gears.
Precaution for environmental protection
65.
1. Be careful not to allow oil enter rivers or groundwater.
2. For a leak on the sea, chemical absorbent must comply with the technical requirements of the regulations
of relevant authorities.