X-Serie S_705 - 第24页
24 Placement heads Nozzle changer Description Nozzle changers incr ease the flexibility of the placement heads when it comes to pro- cessing different compo- nents. The nozzle configuration can be rapidly adjusted to cha…
23
Placement heads
SIPLACE TwinStar (TH)
SIPLACE TwinStar
With component camera type 33
(fine pitch camera)
With component camera type 25
(flip chip camera)
Component range
a
a) Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
b
Max. height
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
c
b) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be re-
stricted.
c) If standard nozzles are used
25 mm (higher available on request)
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
55 mm x 45 mm (single measurement)
For use with two nozzles (multiple mea-
surement)
50 mm x 50 mm or
69 mm x 10 mm
For use with one nozzle
85 mm x 85 mm or
125 mm x 10 mm
up to 200 mm x 125 mm (with restric-
tions)
100 g
25 mm (higher available on request)
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 mm x 0.3 mm
16 mm x 16 mm (single measurement)
55 mm x 55 mm (multiple measure-
ment)
100 g
Programmable set-down
force
1.0 N - 15 N
2.0 N - 30 N
d
d) SIPLACE High-Force Head.
1.0 N - 15 N
2.0 N - 30 N
d
Nozzle types
e
e) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
Nozzle spacing for P&P
heads
70.8 mm 70.8 mm
X/Y accuracy
f
± 26 µm / 3± 35 µm / 4 ± 22 µm / 3± 30 µm / 4
Angular accuracy ± 0.05° / 3± 0.07°/ 4 ± 0.05° / 3± 0.07° / 4
Illumination level 6 6
Possible illumination level
settings
256
6
256
6
f) The SIPLACE benchmark value is measured during the machine acceptance tests. It corresponds to the conditions set
out in the SIPLACE scope of service and supply.
24
Placement heads
Nozzle changer
Description
Nozzle changers increase
the flexibility of the placement
heads when it comes to pro-
cessing different compo-
nents. The nozzle
configuration can be rapidly
adjusted to changing place-
ment jobs. Precisely defined
positions and perfect nozzle
seat in the garage ensure
minimum radial eccentricity
on the placement head.
The nozzle changer for the
MultiStar is fitted with a mon-
itoring device. This checks
whether the nozzle magazine
is seated correctly on the
mount. In addition, the nozzle
changers recognize whether
the magazines are for 1xx,
20xx or 28xx nozzles by the
code.
Nozzle changer for the SIPLACE MultiStar
Magazine for two
standard nozzles
Magazine for one special nozzle, gripper
Nozzle changer for the SIPLACE TwinStar
1 magazine for 9 nozzles
of type 28xx
5 magazine for 12 nozzles of
type 20xx
6 magazines for 20 nozzles of
type 40xx
Nozzle changer for the SIPLACE SpeedStar
4 magazines for 20 nozzles of
type 40xx
1 magazine for 9 nozzles
of type 28xx
3 magazines for 12 nozzles
of type 20xx
25
Placement heads
Nozzle changer
Technical data
Nozzle changer for the SIPLACE SpeedStar
Number of magazines
a
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
a) All magazines in the nozzle changer must be configured.
6
4
Number of nozzle holders
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
120
80
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
6 magazines with 120 nozzle garages
4 magazines with 80 nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 80 nozzle garages
Nozzle types 40xx
Nozzle changer for the SIPLACE MultiStar
Number of magazines
ab
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
b) With restrictions at location 2 for MTC/WPC
6
4
Number of nozzle holders
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
72
48
Standard configuration
SIPLACE X2 S/X3 S/X4 S
SIPLACE X4i S
5 magazines with 60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
3 magazines with 36 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Option: Nozzle changer "row 2" 4 magazines with 48 nozzle garages
Nozzle types
10xx, 11xx, 12xx
20xx, 28xx
Nozzle changer for the SIPLACE TwinStar
Number of magazines
Locations 1 and 3
Locations 2 and 4
max. 12 magazines for max. 24 nozzle garages
max. 10 magazines for max. 20 nozzle garages
Number of nozzle holders may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper