00194103-01 - 第16页

1 Introduction User M anual SIPLACE F5 H M 1.5 EU Declaration of Conformity Software Version SR.408.xx 03/2006 US Edition 16 1.5 EU Declaration of Conformity The pro duct/devic e descr ibed belo w 1 Produc t: Place ment …

100%1 / 230
User Manual SIPLACE F5 HM 1 Introduction
Software Version SR.408.xx 03/2006 US Edition 1.3 Danger notes
15
Service engineers 1
This class is intended for engineers from SIEMENS. They are trained to carry out servicing work
and to upgrade and retrofit the placement system. 1
1.3 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this User Manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.4 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explana-
tory material and does not include any contractual conditions or undertakings. All obligations of
Siemens AG proceed from the conclusion of the contract concerned, under which you have the
machine described herein. This applies in particular to all statements regarding performance or
service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual. 1
1 Introduction User Manual SIPLACE F5 HM
1.5 EU Declaration of Conformity Software Version SR.408.xx 03/2006 US Edition
16
1.5 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE F5 HM
Item no.: 00117550 1
manufactured by 1
SIEMENS AG, Automation and Drives
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of: 1
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on
the approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2,
EN 60204-1, EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8
1)
1
1.6 Revision index
1
1
1) This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
Manual Software version Edition
First edition User manual 406.xx 02/2000 US
Revision User manual 407.xx 01/2001 US
Revision User manual 408.xx 03/2006 US
User Manual SIPLACE F5 HM 1 Introduction
Software Version SR.408.xx 03/2006 US Edition 1.7 Revisions since 01/2001 edition
17
1.7 Revisions since 01/2001 edition
1
1
1.8 Revisions since 03/2006 edition
1
New or modified Chapter/section
Warning labels on the machine 2.1.5
Additional warning labels for the NAFTA region 2.1.6
Safety instructions for processing capacitors based on powdered
metal
2.1.15
Feeder module 10.1.1
Safety instructions for processing capacitors based on powdered
metal
10.1.2
12 mm S feeder for capacitors based on powdered metal, model
C/D
10.2.5
12 mm S feeder for capacitors based on powdered metal, model E 10.2.6
Optical centering with the multi-color PCB camera 11.5.6
Fine calibration 11.13
New or modified Chapter/section
Introduction
1
Operational safety 2
Description of the machine 3.1
Performance data 3.2
The line concept 3.3
Technical data – Ratings 3.5
Dimensions and weight of the placement system 3.6
Controls 3.7
Placement heads 3.9
PCB dual conveyor 3.12
Adjusting the component trolley to another PCB transport height 4.3
Tasks on the machine 5
Feeder modules 6.1
Technical data for the S feeder modules 6.2
Component trolley 6.3