00194103-01 - 第177页
User Manual SIPLAC E F5 HM 7 Options Software Vers ion SR.408.xx 03/2006 U S Edition 7.1 Nozzle changer for the 12-segm ent Collect&Place head 177 7.1.4 Notes on operation Æ When you fi ll a magazi ne with a certain …
7 Options User Manual SIPLACE F5 HM
7.1 Nozzle changer for the 12-segment Collect&Place head Software Version SR.408.xx 03/2006 US Edition
176
Fig. 7.1 - 2 Magazine and nozzle garages
(1) Positioning fiducial
(2) Locking plate
(3) Nozzle garage
(4) Hole for the parallel pin (7) for centering the magazines
(5) Hole for the parallel pin of the slide mechanism
(6) Slot for the parallel pin (7) for centering the magazines
(7) Parallel pin for centering the magazines
(8) Parallel pins to open and close the locking plate
(9) Magazines
User Manual SIPLACE F5 HM 7 Options
Software Version SR.408.xx 03/2006 US Edition 7.1 Nozzle changer for the 12-segment Collect&Place head
177
7.1.4 Notes on operation
Æ When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
PLEASE NOTE 7
Fill the magazines off the machine and always replace complete magazines. 7
Æ Open the locking plate and place the nozzles in the nozzle garages.
Æ Close the locking plate so that the nozzles cannot drop out of the magazines.
CAUTION 7
Before you fill magazine, make sure that all the nozzles on the Collect&Place head have
been returned to their magazines. 7
Æ Programming the nozzle changer is described in the SIPLACE Pro user manual.
PLEASE NOTE 7
Æ Do not allow components to drop onto the magazines. If they do, they could jam the locking
plate.
Æ Do not allow components to drop onto free feeder module locations. They will stick to the
magnetic bar. Production may have to be interrupted if the feeder modules are not placed on
the component table correctly. You should therefore regularly clean the magazines and free
locations.
7 Options User Manual SIPLACE F5 HM
7.1 Nozzle changer for the 12-segment Collect&Place head Software Version SR.408.xx 03/2006 US Edition
178
7.1.5 Position detection
There is a position detection fiducial on every magazine.
Fig. 7.1 - 3 Nozzle changer - Position detection
(1) Positioning fiducial
(2) Position of the nozzles in the magazine with respect to the positioning fiducial