00194103-01 - 第184页
7 Options User Manual SIP LACE F5 HM 7.2 Nozzle changer for the 6-segment Co llect&Place head Software Version SR .408.xx 03/2006 US E dition 184 7.2.5 Emptying the reject bin The capaci ty of th e reject bin is app …
User Manual SIPLACE F5 HM 7 Options
Software Version SR.408.xx 03/2006 US Edition 7.2 Nozzle changer for the 6-segment Collect&Place head
183
7.2.4 Notes on operation
Æ When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
PLEASE NOTE 7
Fill the magazines off the machine and always replace complete magazines. 7
Æ Open the locking plate and place the nozzles in the nozzle garages.
Æ Close the locking plate so that the nozzles cannot drop out of the magazines.
CAUTION 7
Before you fill magazine, make sure that all the nozzles on the Collect&Place head have
been returned to their magazines. 7
Æ Programming the nozzle changer is described in the SIPLACE Pro user manual.
PLEASE NOTE 7
Æ Do not allow components to drop onto the magazines. If they do, they could jam the locking
plate.
Æ Do not allow components to drop onto free feeder module locations. They will stick to the
magnetic bar. Production may have to be interrupted if the feeder modules are not placed on
the component table correctly. You should therefore regularly clean the magazines and free
locations.
7 Options User Manual SIPLACE F5 HM
7.2 Nozzle changer for the 6-segment Collect&Place head Software Version SR.408.xx 03/2006 US Edition
184
7.2.5 Emptying the reject bin
The capacity of the reject bin is approx. 50 nozzles for nozzle family 9xx and approx. 5 nozzles
for nozzle family 8.xx. To avoid interruption of the placement sequence, you should regularly
empty the reject bin.
Fig. 7.2 - 3 Emptying the reject bin
(1) Remove the reject bin
Æ Pull the reject bin out of its retainer in the direction indicated by the arrow, and lift the bin out
of its holder.
Æ To return the reject bin, push it back into the retainer.
7.2.6 Changing the magazine
Æ To remove the magazine, push the spring hook (item 1 in Fig 7.2 - 4) to the side and lift the
magazine out of the carrier.
User Manual SIPLACE F5 HM 7 Options
Software Version SR.408.xx 03/2006 US Edition 7.2 Nozzle changer for the 6-segment Collect&Place head
185
7
Fig. 7.2 - 4 Changing the magazine
(1) Spring hook
(2) Push the spring hook aside.
(3) Positioning fiducial
(4) Latching groove
PLEASE NOTE
When you insert the magazine, make sure that the side with the position fiducial points towards
the spring hook. There is a latching groove on the opposite side of the magazine. 7
Æ To insert the magazine, place the side with the groove on the tray.
Æ Push the spring hook to one side and click the entire magazine onto the carrier.
Release the spring hook.
The spring hook must latch into place.