00194103-01 - 第42页
2 Operational safety User Manual SIP LACE F5 HM 2.3 Laser classif ication Software Vers ion SR.408.xx 03/2006 US Edition 42 2 W arning la bel (num ber per WP C: 4) 2 2 2 2.3 Laser classification PLEAS E NOTE: 2 Module s …
User Manual SIPLACE F5 HM 2 Operational safety
Software Version SR.408.xx 03/2006 US Edition 2.2 Warning labels
41
2.2.4 Warning labels on the waffle-pack changer
2
Fig. 2.2 - 9 Warning labels on the waffle-pack changer
2
Warning label WPC, part no. 00321262-02 (number per WPC:1)
WARNING!
– Remove IC vision illumination unit before
docking or undocking the machine!
> DANGER OF A CRASH <
– Move the waffle-pack changer only over flat
and level floors!
– The waffle-pack storage unit must be in its
LOWEST POSITION before transportation!
> DANGER OF OVERTURNING! <
2 Operational safety User Manual SIPLACE F5 HM
2.3 Laser classification Software Version SR.408.xx 03/2006 US Edition
42
2
Warning label (number per WPC: 4)
2
2
2
2.3 Laser classification
PLEASE NOTE: 2
Modules in laser classes 1 and 1M are not identified.
2.3.1 Laser class 1
2
2
2.3.2 Laser class 2
The following modules are assigned to laser class 2:
– PCB barcode scanner
– Coplanarity laser module
2
2
2
2
DANGEROUS VOLTAGES!
The identified parts are under mains voltage.
Disconnect the machine from the main power supply before ser-
vicing it!
NAFTA region: RISK OF ELECTRIC SHOCK OR BURN!
All installed camera systems and the whole machine when ready
for operation are assigned to laser class 1.
The laser classes are determined as per DIN EN 60825-1:2001.
2
Laser radiation
Do not look into beam!
User Manual SIPLACE F5 HM 2 Operational safety
Software Version SR.408.xx 03/2006 US Edition 2.4 Safety instructions for operating the machine
43
2.4 Safety instructions for operating the machine
2.4.1 Safety instructions on docking and undocking the component trolley
WARNING 2
Æ Never reach into the gap between the component trolley and the placement system frame
while the machine is running (item 1 in Fig. 2.4 - 1
).
Æ Always check that the component trolley is docked on the placement system before connecting
or disconnecting the power cable for the component trolley at the socket on the placement sys-
tem (item 2 in Fig. 2.4 - 1
).
Æ NEVER connect the connecting cable for the component trolley to the socket on the placement
system and then operate the component trolley outside the machine via the compressed air
control unit (item 3 in Fig. 2.4 - 1).
Fig. 2.4 - 1 Safety instructions on the component trolley