00197279-03_SM_Glue-Feeder_EN - 第15页
Replacing Spare Parts 3.5.1 Removing the Cartridge Adapter Changing the Cartridge Adapter Service Manual SIPLACE Glue Feeder 15 3.5 3 . 5 C h a n g in g t h e C a r t r id g e A d a p t e r Changing the Cartridge Adapter…
Replacing Spare Parts
Rear Sliding Guide 3.4.2 Fitting the Sliding Guide
14 Service Manual SIPLACE Glue Feeder
► Now lower the two snap tabs of the sliding guide into
the openings provided on the underside of the glue
feeder.
► Use the 4 screws to fasten the sliding guide to the
glue feeder. Use a Phillips screwdriver for this.
Replacing Spare Parts
3.5.1 Removing the Cartridge Adapter Changing the Cartridge Adapter
Service Manual SIPLACE Glue Feeder 15
3.5
3.5 Changing the Cartridge Adapter
Changing the Cartridge Adapter
Required spare parts
10 ccm cartridge adapter, plastic item no. KA10, item no. 03095057-xx (left)
30 ccm cartridge adapter, plastic item no. KA30, item no. 03095047-xx (right)
3.5.1
3.5.1 Removing the Cartridge Adapter
Removing the Cartridge Adapter
► Place the glue feeder down on a firm surface.
► Hold the cartridge tightly with one hand.
► Turn the cartridge adapter anticlockwise by about
90°.
► Press the cartridge adapter towards the back and pull
it off.
Replacing Spare Parts
Changing the Cartridge Adapter 3.5.2 Fitting the Cartridge Adapter
16 Service Manual SIPLACE Glue Feeder
3.5.2
3.5.2 Fitting the Cartridge Adapter
Fitting the Cartridge Adapter
► Pull the hose off the cartridge adapter.
► Fit the hose to the cartridge adapter.
► Fit the cartridge adapter at the straight points onto the
back of the cartridge and press on as far as the stop.