00197279-03_SM_Glue-Feeder_EN - 第37页
Replacing Spare Parts 3.12.2 Fitting the Dispenser Nozzle Dispenser Nozzle Service Manual SIPLACE Glue Feeder 37 ► Fit the union n ut onto the dispenser n ozzle. ► Position the tw o lugs of the special tool into the two …
Replacing Spare Parts
Dispenser Nozzle 3.12.2 Fitting the Dispenser Nozzle
36 Service Manual SIPLACE Glue Feeder
3.12.2
3.12.2 Fitting the Dispenser Nozzle
Fitting the Dispenser Nozzle
► Lift the flat nozzle off the jet block (spare fluidic).
CAUTION
Poisonous and hazardous substances
To avoid direct contact with the glue, always wear protective gloves during this work.
► Place the flat nozzle centrally onto the thread of the
jet block (spare fluidic).
► Place the nozzle heating onto the jet block and align
this straight on the cartridge pipe.
Replacing Spare Parts
3.12.2 Fitting the Dispenser Nozzle Dispenser Nozzle
Service Manual SIPLACE Glue Feeder 37
► Fit the union nut onto the dispenser nozzle.
► Position the two lugs of the special tool into the two
holes in the union nut.
► Tighten the union nut by turning it clockwise.
► Insert the heating connector into the nozzle heating,
up to the stop.
Replacing Spare Parts
Jet Block (Spare Fluidic) 3.13.1 Removing the Jet Block
38 Service Manual SIPLACE Glue Feeder
3.13
3.13 Jet Block (Spare Fluidic)
Jet Block (Spare Fluidic)
Required spare parts
Spare fluidic, item no. 03094177-xx
Tools and equipment required
▪ Open-ended wrench, size 8
▪ Heating key (on the glue feeder)
▪ Antistatic tweezers, item no. 00377394-01 (service kit)
▪ Allen key size 2.5
▪ Disposable protective gloves
▪ 2 O-rings for plunger
▪ Grease (Barrieta L55/3)
3.13.1
3.13.1 Removing the Jet Block
Removing the Jet Block
CAUTION
Poisonous and hazardous substances
To avoid direct contact with the glue, always wear protective gloves during this work.
► Remove the cartridge pipe, nozzle heating and car
-
tridge into place (see "3.11.1 Removing the Cartridge
Pipe" [ ➙ 29])
► Lift the dispenser nozzle off the jet block.