00197279-03_SM_Glue-Feeder_EN - 第47页
Replacing Spare Parts 3.15.1 Removing the Jet Valve P-DOT Jet Valve P-DOT Service Manual SIPLACE Glue Feeder 47 ► Remove the two mar ked screw s fast ening the fixture block at the bottom. Use a s ize 2.5 Allen key for t…
Replacing Spare Parts
Jet Valve P-DOT 3.15.1 Removing the Jet Valve P-DOT
46 Service Manual SIPLACE Glue Feeder
3.15
3.15 Jet Valve P-DOT
Jet Valve P-DOT
Required spare parts
Jet valve P-DOT with modified cable, item no. 03096487-xx
Required tools
▪ Allen key size 1.5
▪ Allen key size 2
▪ Allen key size 2.5
▪ Heating key (on the Glue Feeder)
▪ Open-ended wrench, size 8
▪Tweezers
▪ Measuring system for plunger setting
3.15.1
3.15.1 Removing the Jet Valve P-DOT
Removing the Jet Valve P-DOT
► Remove the right side cover (see "3.8.1 Removing
the Right Side Cover" [ ➙ 21])
► Remove the cartridge.
► Remove the 4 marked screws which fasten the cover
plate to the frame. Use a size 1.5 Allen key for this.
Replacing Spare Parts
3.15.1 Removing the Jet Valve P-DOT Jet Valve P-DOT
Service Manual SIPLACE Glue Feeder 47
► Remove the two marked screws fastening the fixture
block at the bottom. Use a size 2.5 Allen key for this.
► Remove the two marked screws fastening the fixture
block at the top. Use a size 2 Allen key for this.
► Lift the fixture block out of the glue feeder.
Replacing Spare Parts
Jet Valve P-DOT 3.15.1 Removing the Jet Valve P-DOT
48 Service Manual SIPLACE Glue Feeder
► Unplug the heating connector from the nozzle heat
-
ing.
► Remove the hose from the compressed air connec
-
tion.
► Remove the two marked screws fastening the jet
valve to the frame. Use a size 2.5 Allen key for this.