00197279-03_SM_Glue-Feeder_EN - 第51页
Replacing Spare Parts 3.15.2 Fitting the Jet Valve P-DOT Jet Valve P-DOT Service Manual SIPLACE Glue Feeder 51 ► Align the cartridge pipe centrally and straight in rela - tion to the b ack, s o that the cartridge can be …
Replacing Spare Parts
Jet Valve P-DOT 3.15.2 Fitting the Jet Valve P-DOT
50 Service Manual SIPLACE Glue Feeder
3.15.2
3.15.2 Fitting the Jet Valve P-DOT
Fitting the Jet Valve P-DOT
► Remove the dispenser nozzle from the jet block.
► Loosen the screwed connection with the help of an 8
mm open-ended wrench.
► Remove the cartridge pipe.
► Place the cartridge pipe from behind onto the thread
of the jet block.
► Use a size 8 mm open-ended wrench to loosely fas
-
ten the cartridge pipe in a clockwise direction.
Replacing Spare Parts
3.15.2 Fitting the Jet Valve P-DOT Jet Valve P-DOT
Service Manual SIPLACE Glue Feeder 51
► Align the cartridge pipe centrally and straight in rela
-
tion to the back, so that the cartridge can be correctly
screwed into place.
► Fix the cartridge pipe with one hand in this position
and then screw the lock tight.
► Fit the dispenser nozzle onto the top of the jet block.
► Place the nozzle heating onto the jet block and align
this straight on the feed pipe. (1)
► Place the union nut into the nozzle heating and
tighten. (2) Use the heating key for this.
Replacing Spare Parts
Jet Valve P-DOT 3.15.2 Fitting the Jet Valve P-DOT
52 Service Manual SIPLACE Glue Feeder
► Plug the power supply into the jet valve (down
below). (1)
► Use the marked screw to fasten the power supply into
place on the jet valve. (2) Use a Phillips screwdriver
for this.
► As shown in the diagram, lift the jet valve into the glue
feeder.
► Coat the tips of the two screws with LOCTITE 243.
► Use the two marked screws to loosely tighten the jet
valve to the frame. Use a size 2.5 Allen key for this.