mechanical reference xp141-1.2e - 第18页
Safety Guidelines Edition 1.2 8 XP-141E Mechanical W ARNING Do not insert hands or other body parts into the conveyor inlets. ● Body parts may get caught in the machine resulting in injury. Do not operate the machine whe…
3. Safety Rules for Individual Machine Types
XP-1-series Machines
Safety Guidelines
Edition 1.2 7 XP-141E Mechanical
DANGER
Keep hands clear of the strobe light area and the strobe
light power supply
● The strobe light and its power supply are high voltage areas.
Inserting hands or tools, etc., into this area could result in electrical
shocks.
Keep hands and other body parts clear of the waste
tape cutter.
● The cutter blade on the waste tape cutter could cause serious
injury.
Do not look directly at the strobe light source.
● This light source could cause eye damage if looked at directly.
Safety Guidelines
Edition 1.2 8 XP-141E Mechanical
WARNING
Do not insert hands or other body parts into the
conveyor inlets.
● Body parts may get caught in the machine resulting in injury.
Do not operate the machine when the front/rear cover
has been removed.
● Body parts may get caught in the machine resulting in injury.
Do not disable safety switches and leave safety doors
open.
● Do not operate the machine with the safety switches disabled
(shorted), and the MTU detached. Body parts could become caught
in the machine, resulting in serious injury. After removing the MTU,
be sure to close the safety door.
● Do not short or remove the machine's safety switches. An
operation command could be executed by mistake while the safety
switches are disabled, possibly resulting in serious injury.
Before moving the MFU, be sure that path of movement
is clear of obstacles and persons.
● Careless handling could cause an injury or equipment damage.
Do not move the MFU by applying a sharp push and
then releasing the handle.
● Careless handling could cause an injury or equipment damage.
4. Safety Labels
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
1
8
8
4
1
4
1
6
9
7
5
1
1
1
1
2
2
3
3
3
3
7
9
XP1MO001b
1
1
1
2
3
4
5
6
7
8
9
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
ETHRNET
NETWORK
FERRITE CORE (ACCESARY)
ZCAT3035-1330, TDK
When connecting the network
cable, attach the ferrite
core as shown in the figure.
Stop the machine and press this button at least
once a day to test the machine's safety swiches.
<
CAUTION
>
Tighten the monitor fixing screws to
a torque of 8kg·cm Over tightening the
screws may damage the liquid crystal
display.
+
VH1
-
VH1TRIG*
<CAUTION>
Connect as shown above.
The lamp will not illuminate
property if not connected
correctly.
DANGER
Be sure to turn off the power
and wait five minutes before
replacing the flash lamp.
Front side
Rear Side
[High Voltage]
[Caution]
Safety Guidelines
Edition 1.2 9 XP-141E Mechanical