00191369-02 - 第123页
User Manual HS-50 3 Introduction and Basic Concepts Software Vers ion SR.501.xx 12/99 Issue US 3.3 User Interface - V iews and Menus 123 t I I t Example for the modification of an existing password 3 3 Å Clic k the "…
3 Introduction and Basic Concepts User Manual HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx 12/99 Issue US
122
t IIt
Å Click the menu item Access level ...
The "Access level" dialog box is opened.
3
Å Click the radio button for the required access level.
Å Click the "Change password" button to the right of the access level if you want to allocate a
password or change an existing password.
The dialog box for password entry is now displayed.
Example of initial password allocation 3
3
Å Click the "New password" text box and enter the required password.
Å Click the "Confirm password" text box and re-enter the password.
Å Click the OK button to confirm the password.
User Manual HS-50 3 Introduction and Basic Concepts
Software Version SR.501.xx 12/99 Issue US 3.3 User Interface - Views and Menus
123
t IIt
Example for the modification of an existing password 3
3
Å Click the "Old password" text box and enter the current password.
The other two text boxes now become active.
Å Click the "New password" text box and enter the new password.
Å Click the "Confirm password" text box and re-enter the new password.
Å Click the OK button to confirm the password.
Å Click OK to close the "Access level" dialog box.
Control mode... 3
The control mode determines how the station is supplied with the necessary placement data. 3
Å Click the menu item Control mode...
The "Control mode" dialog box is displayed.
3
3 Introduction and Basic Concepts User Manual HS-50
3.3 User Interface - Views and Menus Software Version SR.501.xx 12/99 Issue US
124
t IIt
Control Modes: 3
Stand alone (for test purposes only) 3
This control mode allows you to load a cluster (placement program) for test and service purposes
from the station computer using the menu item "New cluster..." .
The necessary data must be located on the station computer’s hard disk. 3
GEM Host 3
In this control mode, clusters can only be specified by the host computer.
The necessary data must be located on the host computer’s hard disk. 3
NOTE
This setting must be activated if you want to download cluster data from the host computer to the
station computer via the GEM interface. The procedure for doing this is described in Chapter. 13.
This control mode cannot be set in the current software version since the "GEM Interface" option
has not yet been implemented. 3
Line Computer 3
If a cluster has been prespecified at the station, all the necessary associated data is loaded from
the line computer. The data must be located on the line computer’s hard disk. 3
NOTE
By default, clusters and set-ups should be prespecified by the line computer.
If the line computer is powered down via "Shut down" and then rebooted, all the connected sta-
tions must also be rebooted. 3
SIPLACE Pro 3
This control mode cannot be set in the current software version. 3
3
Å Activate the radio button for the required control mode.
Å Click OK to make your settings active.