00191369-02 - 第135页
User Manual HS-50 4 Placement Functions Software Vers ion SR.501.xx 12/99 Issue US 4.1 S etup Display 135 t I I t 4.1.2.1 Accept able Barcodes The list o f barcod es (max . of 6) tha t are kn own for the co mponen t in t…
4 Placement Functions User Manual HS-50
4.1 Setup Display Software Version SR.501.xx 12/99 Issue US
134
t IIt
Å Click on the Comp. verification with barcode ... button
The following window is opened. The data for the selected track is displayed so you can check
the data.
4
Fig. 4.1 - 2 "Component verification with barcode" window
4
Å Read the component barcode in from the corresponding component reel with the
barcode reader. The barcode read in is displayed in the "Barcode:" line (see Fig. 4.1 - 3
).
NOTE
If the component barcode cannot be read in, then enter it manually. The procedure is
described in Section 4.1.2.2. 4
User Manual HS-50 4 Placement Functions
Software Version SR.501.xx 12/99 Issue US 4.1 Setup Display
135
t IIt
4.1.2.1 Acceptable Barcodes
The list of barcodes (max. of 6) that are known for the component in the selected track is displayed
with this function. 4
Å Click on the Acceptable barcodes button
The following selection box is opened.
4
Å Click on the Close button. The selection box is closed.
The barcode read in using the barcode reader is compared to the possible barcodes.
The positions hidden due to the filter (marked by a ¤) will not be used for the comparison.
The results of the barcode comparison will be displayed in the display field of the "Component
verification with barcode" window (see the following examples).
The barcodes match.
4
The barcodes do not match.
4
4 Placement Functions User Manual HS-50
4.1 Setup Display Software Version SR.501.xx 12/99 Issue US
136
t IIt
4.1.2.2 Manual Input of the Component Barcodes
Å Click on the Manual input button to enter the barcode by hand.
The following input box is opened.
4
Å Enter the barcode in the input field and close the input box using OK.
The barcode comparison is started.
The results of the barcode comparison will be displayed in the display field of the "Component
verification with barcode" window (see Section 4.1.2.1
).
Å The further procedure is described in Section 4.1.2.1.
4.1.2.3 Refilling an Empty Track With "Refill track"
As soon as a feeder in an empty track has been refilled with components, this fact must be con-
firmed so that the placement head can access this track again. This is done with the help of the
"Refill track" function. 4
4
Fig. 4.1 - 3 "Component verification with barcode" window, matching barcodes
4