00191369-02 - 第173页
User Manual HS-50 5 Single Functions Software Version S R.501.xx 12/99 Issue US 5.3 Single functions, Transpo rt 173 t I I t 5.3 Single functions, T ransport NOTE The travel fun ction s of the X or Y -axi s can onl y be …
5 Single Functions User Manual HS-50
5.2 Single functions, Gantry Software Version SR.501.xx 12/99 Issue US
172
t IIt
Confirm magaz. 5
This function is used to confirm that an individual magazine has been filled with a new nozzle
type.
When changing the set-up of a machine it may be necessary to change the type of nozzle in
some of the magazines. To do this, the current nozzle configuration (Actual) and the nozzle con-
figuration for the new set-up (Preset) is shown in the table for each of magazine. When you
change the nozzle type from the "Actual" to "Preset" type, you must confirm this for each maga-
zine separately.
Å Click the entry in the table which corresponds to the magazine for which you must change the
nozzle type. The line is now highlighted in light blue.
Å Click the Lock. op./close button.
Å Replace all the nozzles in this magazine with the nozzle type shown in the "Preset" column.
Å Click the Lock. op./close button again.
Å Click the Confirm magaz. button.
The change of is now confirmed. In the table, the arrow ( <== ) is no longer displayed next to
the entry for this magazine.
5
5
User Manual HS-50 5 Single Functions
Software Version SR.501.xx 12/99 Issue US 5.3 Single functions, Transport
173
t IIt
5.3 Single functions, Transport
NOTE
The travel functions of the X or Y-axis can only be carried out when the machine cover is closed.
To execute this function, press the start button.
As a rule, the gantries only travel slowly. The revolver head is set to travel slowly. 5
Å On the tool bar in the main view, click the symbol which represents the transport you want to
test the functions of (or select the corresponding menu item from the "View" menu, e.g. "Trans-
port 1" for Transport 1).
NOTE
When dual transport is installed and available in the machine options, the single functions
can be called for either the right-hand transport (Transport 1) or the left-hand transport
(Transport 2). The functions are identical for both right and left. The symbols used to call the
single functions are marked with the number which corresponds to the transport side.
Example for Transport 1 (= right-hand transport or single transport). 5
The user interface is switched to the "Transport functions" screen of the selected transport (see
Fig. 5.3 - 1
). 5
5
5 Single Functions User Manual HS-50
5.3 Single functions, Transport Software Version SR.501.xx 12/99 Issue US
174
t IIt
5.3.1 "Transport functions" screen
The transport functions are used for checking and adjusting the functional modules of the board
conveying systems. 5
5
Fig. 5.3 - 1 "Transport functions" screen
Key to Fig. 5.3 - 1
(1) Functions for the board conveying systems
(2) Functions for adjusting the transport conveyor width
(3) Functions to display state of the ultrasonic sensors
5
5
12
3