SA_HF_intern_0194307-02_eng - 第14页

2 Safe ty What to do Be fore Starting Servicing Work. .. SIPL ACE HF-Ser ies Safety Instruction s for the Comp ressed Ai r Supply 2-8 0019 43 07- 02 Is su e 1 1/ 2004 Copy ri gh t © 2 004 S ie m ens WARNING To avoid dama…

100%1 / 76
SIPLACE HF-Series
Safety Instructions for the Compressed Air Supply
Safety
What to do Before Starting Servicing Work...
2
Copyright © 2004 Siemens 00194307-02 Issue 11/2004 2-7
1
3
2
Turn the operating lever (1) counterclockwise.
Use the screwdriver to push the locking lug (2) out of the
operating lever (1).
Secure the operating lever with a padlock (3).
Alternatively: Attach warning signs.
If a machine can be locked, it must be. However, there are situations where energy isolating devices can not
accommodate locks. In these cases, the energy isolating devices must be tagged to warn employees that the machine is
de-energized for servicing. The tag must be securely fastened, it must be placed in a position visible to all and it may only
be removed by the person who attached it.
2
Safety
What to do Before Starting Servicing Work...
SIPLACE HF-Series
Safety Instructions for the Compressed Air Supply
2-8
00194307-02 Issue 11/2004 Copyright © 2004 Siemens
WARNING
To avoid damaging the collect+place head, ALWAYS observe the following points when moving the gantry:
NEVER move the gantry by pushing with your hands against the collect+place head.
NEVER push the gantry while the Z-axis is lowered.
ALWAYS take hold of the X-axis base with your hands to move the gantry.
SIPLACE HF-Series
Replacing the Gantry [03006781-xx]
Service
Gantries
3
Copyright © 2004 Siemens 00194307-02 Issue 11/2004 3-1
3 Service Work
DANGER
Please observe the safety instructions in the Operating Manual for all service work!
See
What to do Before Starting Servicing Work...:
Page 2-6
3.1 Gantries
See
Safety Instructions for Working with Strong Magnetic Fields:
Page 2-1
3.1.1 Replacing the Gantry [03006781-xx]
Tools
Special torque wrench („Bruchsal version“)
Blue covers [00355787-xx]
Preparation
Depending upon the configuration of the machine, you will need to remove the relevant modules, covers and cover plates
before you can dismantle the gantry.