SA_HF_intern_0194307-02_eng - 第26页

3 Serv ice Gan tri es SIPL ACE HF-Ser ies Replacing the T railing Cable [03013940 -xx] 3-12 0019 43 07- 02 Is su e 1 1/ 2004 Copy ri gh t © 2 004 S ie m ens 3.1.2 Replacing the Traili ng Cable [ 030139 40-xx] Par ts  Tr…

100%1 / 76
SIPLACE HF-Series
Replacing the Gantry [03006781-xx]
Service
Gantries
3
Copyright © 2004 Siemens 00194307-02 Issue 11/2004 3-11
Install the magnetic strip (1).
Make sure there is a gap of 0.8 mm between two magnetic
strips.
Install the blue covers.
Install the cover plate for the magnet.
Install the trailing cable.
Install the PCB camera.
Reconnect to the electrical and pneumatic systems.
Fasten all electrical leads and pneumatic hoses at the correct
points.
Install all dismantled modules, covers and cover plates.
3
Service
Gantries
SIPLACE HF-Series
Replacing the Trailing Cable [03013940-xx]
3-12
00194307-02 Issue 11/2004 Copyright © 2004 Siemens
3.1.2 Replacing the Trailing Cable [03013940-xx]
Parts
Trailing cable for HF 3 (gantry 1 or 3) [03013642-xx]
Trailing cable for HF (gantry 4) [03013940-xx]
Preparation
The trailing cable is supplied as a fully assembled module. Depending upon the configuration of the machine, you will
need to remove the relevant modules, covers and cover plates before you can dismantle the trailing cable.
Where necessary, remove the cover plates from the gantry
trailing cable. Mark their exact position to ensure correct
replacement later.
Remove the top central cover from the SIPLACE machine.
Remove the top EMC plate.
Remove the upright EMC plates so that you can reach the
trailing cable.
SIPLACE HF-Series
Replacing the Trailing Cable [03013940-xx]
Service
Gantries
3
Copyright © 2004 Siemens 00194307-02 Issue 11/2004 3-13
Overview
5
5
6
7
1
4
3
2
The flat ribbon cables are run from the head board (1), via
the trailing cable console (2) and the power track chain (3)
to the gantry interface (7) and the trailing unit interface
gantry (4).
The compressed air hoses are run from the pneumatic
distributor (6), via the trailing cable console (2) and the
power track chain (3) to the gantry distributor (5) .