SA_HF_intern_0194307-02_eng - 第7页
SIPL ACE HF-Ser ies Qualified Personnel Safe ty Sa fet y In s tr ucti o n s 2 Copy ri ght © 200 4 S ie m ens 0019 43 07- 02 Is su e 1 1/ 2004 2-1 2 O perati on al Sa fet y 2.1 Saf ety Instruc tions 2.1.1 Qualified Person…
1
General
Information about this Service Manual
SIPLACE HF-Series
Qualified Personnel
1-2
00194307-02 Issue 11/2004 Copyright © 2004 Siemens
1.2 Information about this Service Manual
The service work described in this manual may only be performed by specially trained Siemens service technicians, with
appropriate qualifications and expertise.
NOTE:
This internal SIEMENS AG document is a supplement to the
HF Service Manual (from A001). It describes service work to SIPLACE HF machines (from A001), which may only be
performed by specially trained Siemens service technicians.
If you should have any questions about the contents of this manual, please contact the
Siemens Competence Center (SCC).
Tel.: 089 20800 43830
SIPLACE HF-Series
Qualified Personnel
Safety
Safety Instructions
2
Copyright © 2004 Siemens 00194307-02 Issue 11/2004 2-1
2 Operational Safety
2.1 Safety Instructions
2.1.1 Qualified Personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up, operation and
maintenance of automatic placement systems and add-on devices and are suitably qualified, e.g.:
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical circuits and
system components in accordance with normal safety standards.
Have been trained or instructed in the upkeep and use of appropriate safety equipment in accordance with normal
safety standards.
Have received first aid training.
2.1.2 Safety Instructions for Working with Strong Magnetic Fields
WARNING
Strong permanent magnetic fields inside the machine!
DANGER TO LIFE
Risk of lethal injuries to persons with active implants (e.g. pacemakers, defibrillators, insulin pumps etc.).
2
Safety
Safety Instructions
SIPLACE HF-Series
Safety Instructions for Work on the Cutting Device
2-2
00194307-02 Issue 11/2004 Copyright © 2004 Siemens
DANGER OF CRUSHING
Danger of crushing for persons with passive metal implants (e.g. plates and screws).
Do not reach into the machine or bend towards it when the safety covers are open. Do not bring any metal objects into
the area.
CAUTION - STRONG MAGNETIC FIELDS
There is a risk that the strong magnetic fields could corrupt data on data media or credit controller boards and check
controller boards.
2.1.3 Safety Instructions for Work on the Cutting Device
DANGER
The machine must be switched OFF and disconnected from the mains before you perform any work in the area of
the cutter.
In addition, the compressed air supply must be turned off at the main valve of the compressed air unit in the
machine frame and the compressed air lines must be bled by actuating the needle valve on the compressed air
unit.
Always secure the machine against unauthorized reactivation