SA_HF_intern_0194307-02_eng - 第72页
在线预览 SA_HF_intern_0194307-02_eng PDF 文档。
SIPLACE HF-Series
Replacing the Toothed Belt for the Width Adjustment System Drive [00369662-xx]
Service
Modular PCB Conveyor System
3
Copyright © 2004 Siemens 00194307-02 Issue 11/2004 3-57
3.3.1.1 Resetting the Parallelism of the Adjustment Unit
If a ball screw and adjustment unit have twisted out of position (the conveyor system will no longer run parallel), please
proceed as follows:
1
1
2
4
3
2
Unscrew the three fastening screws (2) on the toothed wheel
(1).
The ball screw (3) and adjustment unit (4) can now be manually
turned (hold onto the toothed wheel and revolve the ball screw).
Measure the distance between a fixed adjustment unit and the
fixed conveyor side.
Turn the loose ball screw (3) until the adjustment unit (4) is set
to this value.
Fix the position with the 3 fastening screws (2) on the toothed
wheel (1).
Index
Copyright © 2004 Siemens i
Index
Ball screws 3-54
Belt tension
Width adjustment 3-56
Blade
Stationary 3-48
Cooling tubes 3-15
Cutter blades
Cutter 3-44
Drive toothed belt 3-56
Ethanol 3-7
Excenter axis 3-55
Flashlight
Xenon 3-33
Flat ribbon cable 3-14
Forcing screws 3-28
Gap 3-33
Guide slide 3-6, 3-39
Head adapter board 3-2
Head board 3-2
Insulating plates 3-23
Locking screws 3-28
Loctite 3-15
Loctite 241 3-23, 3-32
Loctite 242 3-20
Lubrication nipple 3-41
Magnet cover plate 3-5, 3-40
Oil stone 3-7
Pneumatic hoses 3-26
Pressure plates 3-3, 3-15
Protective gloves 3-44
Screw clamps 3-52
Sliders 3-53