CX-1_OPE.pdf - 第7页
目录 目录 前言 1 本书的概要 ····························· 1 1-1 关于标记 ······························· 1 1-2 本书的构成 ······························ 1 2 入门操作 ······························ 2 第 1 章 设备概要 1-1 设备概要 ·························…
为了安全使用 CX-1 的注意事项
1.为了防止触电引起的事故，请勿在接通电源的状态下打开电气设备箱。
2.为防止触电，请勿在拆下接地线的状态下运行。
危险
1.为防止人身受伤，请勿在拆下安全盖、安全装置等状态下运行。
2.为防止人身受伤，请务必小心，以免头发、衣服等被卷入传送带链。此外，请勿戴手套。
3.为防止人身受伤，维护时（加油、调试、日常检查），请切断电源。
4.为防止人身受伤，请在电源线上使用漏电断路器。
注意
1 :本装置的操作系统采用 Windows XP（包括以太网通信功能）。
若安装用于本装置以外的软件，本公司将无法保证正常的操作。同样，如果对 HDD 内
的文件进行转移、重命名、复制，也无法保证正常的操作，敬请谅解。
●万一出现此类情况，需重新更换 HDD，导致数据丢失，因此请特别注意。
注意
1 :本装置配备有 UPS，以保护停电时的生产程序等。
为防止 UPS 内置电池的损耗，请勿在非通电状态下将本装置放置 6 个月以上。
●本装置以总断路器及总开关 ON 的状态为通电状态。
注意
高度测量装置(HMS)的测量对象的有关注意事项
请注意：测量对象为下列材质、形状时，可能无法测量、或测量精度不准的情况。
材料透明部分、反射率非常小的材质、比识别直径小、弯曲度大、倾斜度大的对象等。
注意
1．开关安全盖时请注意下列事项。
• 打开安全盖时要把盖子向上开足直到上了锁，确认上了锁后再放开手。没有上好锁就放
开手时，盖子有落下来的危险。
• 关盖子时先解开锁，再关闭盖子。
（请注意，解开锁时不要使盖子落下来导致受伤。）
• 不要过渡增加盖子、手把等的负荷。
注意
1 : 因为有可能使盖损坏，所以安装等时请不要站到机器上面。
注意
操作裸芯片时的注意事项
裸芯片沾上脏污等时会影响元件识别。长时间放置时，请盖上罩，以免沾上灰尘脏污。
注意
IV
目录
目录
前言
1 本书的概要·····························1
1-1 关于标记 ······························· 1
1-2 本书的构成 ······························ 1
2 入门操作······························2
第 1 章 设备概要
1-1 设备概要 ···························1-1
1-2 CX-1 系统构成·························1-2
1-3 设备概要 ···························1-3
1-3-1 本设备的构成 ···························· 1-3
1-3-1-1 正面图及右侧图 ······················· 1-3
1-3-1-2 设备内部(基板生产及周围部分) ················ 1-4
1-3-1-3 贴片头单元的构成 ······················ 1-5
1-3-1-4 ATC 单元（自动工具更换）的构成 ··············· 1-6
1-3-1-5 吸嘴 ···························· 1-7
1-3-1-6 OCC 的构成 ························· 1-9
1-3-1-7 VCS 的构造 ························· 1-9
1-3-1-8 HMS ··························· 1-11
1-3-2 机械规格 ···························· 1-12
1-3-3 对象元件及元件包装方式 ····················· 1-14
1-3-4 印刷基板规格 ·························· 1-15
1-3-5 定心系统 ···························· 1-18
1-3-6 X,Y,Z,θ轴的说明 ························ 1-19
1-3-7 操作面板 ···························· 1-20
1-3-8 缩略语说明 ··························· 1-21
1-4 菜单的构成 ························· 1-22
第 2 章 生产
2-1 流程图 ····························2-1
2-2 概要 ·····························2-2
2-3 装置的启动和结束 ·······················2-3
2-4 预热 ·····························2-6
2-5 空运行模式 ··························2-7
i
目录
2-6 文件操作 ···························2-8
2-6-1 新建 ······························· 2-8
2-6-2 打开(读入文件) ·························· 2-8
2-6-3 覆盖保存 ····························· 2-9
2-6-4 另存为 ······························ 2-9
2-6-5 文件管理 ····························· 2-9
2-6-6 生产程序、初始文件夹 ······················· 2-9
2-6-7 设置打印机 ··························· 2-10
2-6-8 打印 ······························ 2-10
2-6-9 控制数据管理 ·························· 2-10
2-7 生产准备 ·························· 2-11
2-7-1 基板的设置 ··························· 2-11
2-7-1-1 传送部的构成························ 2-12
2-7-1-2 传送导轨宽度的调整····················· 2-13
2-7-1-3 销基准的调整方法······················ 2-15
2-7-1-4 外形基准的调整方法····················· 2-18
2-7-1-5 其他调整·························· 2-21
2-7-2 元件供给部分的准备 ······················· 2-22
2-7-3 ATC 的准备 ··························· 2-22
2-8 生产画面 ·························· 2-23
2-8-1 生产画面的启动 ························· 2-23
2-8-2 生产条件画面 ·························· 2-24
2-8-3 生产开始 ···························· 2-29
2-8-3-1 生产状态·························· 2-30
2-8-3-2 生产设备状态························ 2-32
2-8-3-3 暂停···························· 2-33
2-8-3-4 中断···························· 2-34
2-8-3-5 退出生产·························· 2-34
2-9 生产管理信息 ························ 2-35
2-9-1 生产管理信息 ·························· 2-35
2-9-2 生产信息 ···························· 2-40
2-9-3 传送·I/O 状态·························· 2-41
2-10 工具 ··························· 2-43
2-10-1 设置元件数 ··························· 2-43
2-10-2 操作选项 ···························· 2-44
2-10-3 修改数据 ···························· 2-45
2-10-4 自动调整基板宽度 ························ 2-46
2-10-5 重试列表 ···························· 2-46
2-10-6 检查 ······························ 2-49
ii