MAN00000772_SI-G200BB_SVCPDFA.pdf - 第154页

CLGB-10106-01 SI-G200BB Serv i ce Manual "Console Operation Procedure Contents " SHEET 2/2 Pickup Position Setup......... ................... .................... ................. HLG B-10 31 1-01 Checking Pic…

100%1 / 712
CLGB-10106-01
SI-G200BB Service Manual
"Console Operation Procedure
Contents"
CLGB-10106-01
SI-G200BB Service Manual
"Console Operation Procedure
Contents"
SHEET
2/2
Pickup Position Setup................................................................. HLGB-10311-01
Checking Pickup Position ........................................................... HLGB-10312-01
Mount Accuracy Calibration........................................................ HLGB-10313-01
XY Axis Software Limit Setup ..................................................... HLGB-10314-01
Conveyor Width Adjustment ....................................................... HLGB-10315-01
Measuring Parallelism of Reference Pin and Dependent Pin ..... HLGB-10316-01
Parts Discard Position Adjustment.............................................. HLGB-10317-01
2-4 Adjustment
Matching of X Axis Z-Phase ....................................................... HLGB-10401-01
Matching of Y Axis Z-Phase........................................................ HLGB-10402-01
H Axis Gear Z-phase Matching................................................... HLGB-10403-01
Adjustment of H Axis Upper End OT Sensor (H-CCW) .............. HLGB-10404-01
Adjustment of H axis Lower End OT Sensor (H-CW) ................. HLGB-10405-01
FF/FR Axis Z-Phase Matching.................................................... HLGB-10406-01
Adjustment of FF/FR Axis Belt Tension ...................................... HLGB-10407-01
Adjustment of RTF/RTR Axis Belt Tension ................................. HLGB-10408-01
Adjustment of RNF/RNR Axis Belt Tension ................................ HLGB-10409-01
Gap Adjustment for Head Unit Mechanical Valve and Plunger... HLGB-10410-01
Adjustment of Plunger Upper/Lower Backward Detect Sensor .. HLGB-10411-01
Nozzle Height Adjustment .......................................................... HLGB-10412-01
Nozzle Escape Detect Sensor Position Adjustment ................... HLGB-10413-01
Phase Adjustment for Nozzle ..................................................... HLGB-10414-01
Nozzle Sensor Adjustment ......................................................... HLGB-10415-01
Adjustment of PWB Sensor ........................................................ HLGB-10416-01
Adjustment of Cassette Float Sensor Height.............................. HLGB-10417-01
Adjustment of PWB Stopper Sensor........................................... HLGB-10418-01
Fixed Camera Pickup Check Sensor Adjustment ....................... HLGB-10419-01
Area Sensor Light Axis Adjustment............................................. HLGB-10420-01
Ejector Setup.............................................................................. HLGB-10421-01
Blow Flow rate Setup.................................................................. HLGB-10422-02
Vacuum Pump Sensor Setup ..................................................... HLGB-10423-01
Supplied Air Sensor Setup.......................................................... HLGB-10424-01
Adjustment and checking of H-axis software limit....................... HLGB-10425-01
HLGB-10101-01
Install the Calibration Plate Jig
Operations to use the calibration plate jig are as follows.
When performing the following operations, install the calibration plate jig according to the procedure
described in this section.
Set-Up
Calibration
[Necessary jigs]
•
Calibrationplatejig
• Jig positioning pin
[Procedure]
Click in an order of MANUAL menu
PWB TRANSPORT tab Conv. Wid.
Adj. button.