MAN00000772_SI-G200BB_SVCPDFA.pdf - 第182页

HLGB-10204-01 PWB Camera Setup Click the PWB Camera S etup button on the Machine Set up screen. Click the XY button on the PWB Camera Setup screen. XY Axis screen is disp l a yed. Click the Jog Move button. Press the cur…

HLGB-10204-01

PWB Camera Setup

Perform this working on both heads on the front side and rear side.

[Necessary jigs]

• Thickness gauge (t=1.0 mm)

[Procedure]

When the CALIBRATION screen is displayed, press the Complete button to return to the

HI screen.

Press the [ORG] button on the operation panel.

Click in an order of M/C SETUP menuM/C MAINTENANCE tabCalibration button.

“

Press the [START] button on the operation panel.

For procedures when selecting head for which calibration is performed, and when changing calibration jig,

refer to the “How to display calibration screen (HLGB-10105-01)”.

Click the Machine Setup button.

HLGB-10204-01

PWB Camera Setup

Click the PWB Camera Setup button

on the Machine Setup screen.

Click the XY button on the PWB

Camera Setup screen.

XY Axis screen is displayed.

Click the Jog Move button.

Press the cursor key to jog-move the

head part onto the transfer rail.

HLGB-10204-01

PWB Camera Setup

Loosen cap screws (2-CP4x8） fixing

the PWB camera.

Put thickness gauge of 1.0mm between

the PWB camera and the camera

support bracket and temporarily fix

them.

Adjust inclination of the transfer rail

displayed on the PCBOARD DISPLAY

screen so as to align it with the

cross-hair line.

After adjusting inclination, tighten the

cap screws (2-CP4x8) to fix the PWB

camera.

Remove the thickness gauge.