MAN00000772_SI-G200BB_SVCPDFA.pdf - 第280页

HLGB-10315-01 Conveyor Wid th A djustment [Procedure] Click in an order of MANUAL menu  PWB TRANSPORT tab  Conv . W id. Ad j . button. Press the [ORG] button on the operation panel wi th th e Conv . Adj. screen being d…

HLGB-10314-01

XY Axis Software Limit Setup

Click in an order of M/C SETUP menu

 ORG OFFSET tab  XY button.

XY Axis screen is displayed.

Click the Jog Move button.

Press the upper cursor to jog-move Y

axis in positive direction.

Press the [RESET] button on the

operation panel to cancel the alarm.

Check that the present position of Y

axis displayed on the operation screen

of XY axis is same as the value

calculated in the setup procedure 1.

Press the [ORG] button on the

operation panel to perform origin

position return.

HLGB-10315-01

Conveyor Width Adjustment

[Procedure]

Click in an order of MANUAL menu

 PWB TRANSPORT tab  Conv.

Wid. Adj. button.

Press the [ORG] button on the

operation panel with the Conv. Adj.

screen being displayed.

Click the Abs. Move button on the

Conv. Adj. screen.

Input “410” into the input box of the

Conv. Width Abs. Pos.

Press the [START] button on the

operation panel.

HLGB-10315-01

Conveyor Width Adjustment

Click in an order of M/C SETUP menu

 CONV. PARAM tab.

Enter a difference value between the

value of narrowest conveyor width

measured in the procedure 3 and the

standard value “410.5 mm” into the

CV offset box.

Click the Set button.