MAN00000772_SI-G200BB_SVCPDFA.pdf - 第308页
HLGB-10407-01 Adjustment of FF/FR A xis Belt T ensio n For the detailed operatin g method of the tension m eter , re fer to th e manual attached to the tension meter . Set the measu ri ng ter mi nal of ten sio n meter ne…
HLGB-10407-01
Adjustment of FF/FR Axis Belt
Tension
[Necessary jigs]
• Tension block Jig
• Tension meter
[Procedure]
Fix the tension block jig to the feed
part body with two screws (2-M3).
Tighten the tension adjustment screw
and temporarily fasten to the motor
bracket.
HLGB-10407-01
Adjustment of FF/FR Axis Belt
Tension
For the detailed operating method of the
tension meter, refer to the manual attached to
the tension meter.
Set the measuring terminal of tension
meter near the belt on the middle
between both pulleys.
When the belt is pulled by finger,
tension value of the belt is displayed
on the tension meter.
Standard:70 85N
HLGB-10408-01
Adjustment of RTF/RTR Axis Belt
Tension
[Necessary jigs]
• Tension meter
[Preparation before work]
For the detailed operating method of the
tension meter, refer to the manual attached to
the tension meter.
Place the measuring terminal of the
tension meter on the center between
the both pulleys.
Knock the RN axis belt with finger,
then tension value on the belt is
displayed on the tension meter.
Measure the tension on the 4 measuring points on the RT axis belt, and check the value of
the tension.
±