MAN00000772_SI-G200BB_SVCPDFA.pdf - 第336页
HLGB-10415-01 Nozzle Sensor A djustment If the T e achin g button does not become enabled, click on th e “Nozzle sensor coordina te ” column and then click the T eaching button again. Operate th e X Y T eaching window to…
HLGB-10415-01
Nozzle Sensor Adjustment
[Coordinate value setup for sensor]
Attach the jig nozzle so that the black dot on the
bottom of the nozzle comes inward of the turret.
Click in an order of MANUAL menu
AXIS MOTION tab RT button.
Operate the RT axis screen and move
the turret No.1 down to the H axis.
Click the Return button to close the
Turret RT Axis screen.
Check that angle of the RN axis is 0
on the axis operation screen.
HLGB-10415-01
Nozzle Sensor Adjustment
If the Teaching button does not become enabled,
click on the “Nozzle sensor coordinate” column
and then click the Teaching button again.
Operate the XY Teaching window to
align the light axis of the sensor and
the black dot on the bottom of the jig
nozzle.
Click the Set the nozzle tip button.
Click the Acq Pos. button.
HLGB-10415-01
Nozzle Sensor Adjustment
[Threshold value setting for sensor]
Set the threshold value after the XY coordinate for the nozzle has been set.
Attach the nozzle used in the production process
(do not attach the jig nozzle).
Click in an order of MANUAL menu
AXIS MOTION tab RT button.
Operate the RT axis screen and move
the turret No.1 down to the H axis.
Click the Return button to close the
Turret RT Axis screen.
Check that angle of the RN axis is 0
on the axis operation screen.