MAN00000772_SI-G200BB_SVCPDFA.pdf - 第603页
BBGB-10101-01 Alarm List for the Servo Pack "Sigma-III" Series (SGDS type) Alarm Display Alarm Name Situation at A l arm Occurrence Cause Corrective Actions A.F10 CPF00 CPF01 *1. This alarm occurs when the com …
BBGB-10101-01
Alarm List for the Servo Pack
"Sigma-III" Series (SGDS type)
Alarm
Display
Alarm Name Situation at Alarm Occurrence Cause Corrective Actions
A.E00
A.E01
A.E02
A.E07
A.E40
A.E50
A.E51
A.E60
A.E61
A.EA0
A.EA1
A.EA2
A.ED0
BBGB-10101-01
Alarm List for the Servo Pack
"Sigma-III" Series (SGDS type)
Alarm
Display
Alarm Name Situation at Alarm Occurrence Cause Corrective Actions
A.F10
CPF00
CPF01
*1. This alarm occurs when the communications is still disabled five seconds after digital operator power supply is ON, or when digital operator communications disabled status stays while an option unit is
connected.
*2. This alarm occurs when digital operator received data error occurs consecutively five times, or when the state that digital operator receives no data from SERVOPACK for one second or more occurs
consecutively three times.
BBGB-10101-01
Alarm List for the Servo Pack
"Sigma-III" Series (SGDS type)
[How to use Digital Operator]
Digital Operator (Model: JUSP-OP05A) for Sigma-III series SGDS SERVOPACK made by
YASKAWA is an option for displaying/setting user constant in the SERVOPACK.
This section describes basics of how to use Digital Operator.
Connecting the Digital Operator
Connect the digital operator to the CN3 connector of the SERVOPACK.
The digital operator connector can be inserted or removed also when the power is supplied to
the SERVOPACK.