MAN00000772_SI-G200BB_SVCPDFA.pdf - 第84页
Install Tray Unit (Including machine modification) SHEET 45/73 WKGB-10104-03 Installing Tray Unit (Including machine modificat ion) [Docking with mounter main bo dy ] [Necessary jig and T ools ] ・ S panner(17[mm]) ・ S …
Install Tray Unit (Including machine modification)
SHEET
44/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Input of tray parts pickup Y coordinate]
1
Open “c:¥asm¥mcdata2¥supply_pos.ini”
by word pad.
2
Rewrite the pickup Y coordinate value on
the [Cass118] to the same value of the
pickup Y coordinate on the [Cass101].
3
Overwrite and save the file and restart the
mounted machine.
Install Tray Unit (Including machine modification)
SHEET
45/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
[Docking with mounter main body]
[Necessary jig and Tools]
・Spanner(17[mm])
・Spanner(24[mm])
・Spanner(30[mm])
・Hex-Wrench(10[mm])
・Scale(300[mm])
1
Remove front middle cover and rear
upper cover and side upper cover, side
lower cover.
Install Tray Unit (Including machine modification)
SHEET
46/73
WKGB-10104-03
Installing Tray Unit
(Including machine modification)
2
Adjust the height of Pin of Tray unit and
long circle hole of mount bracket to
same height.
NOTE:
Adjust four adjuster foot evenly, when change
the height of Tray-unit.
3
Insert the locate pin of tray unit to pin
hole of mount bracket.
4
Adjust height of tray unit.
NOTE:
Adjust height from upper section of the tray
unit electric component cover to bottom of S
axis unit face to 202[mm] 206[mm].
NOTE:
At this time, please confirm the caster of the
tray unit is not touching the floor.
204±2[mm]