00195397-01_Installation Manual Setup Center 2.3 - 第10页
Navigation Guide for Installation SIPLACE Setup Center 2.3 10 Installation Manual SIPLACE Setup Center 2.3
Navigation Guide for Installation
SIPLACE System
Installation Manual SIPLACE Setup Center 2.3
9
3 Navigation Guide for Installation
3.1 SIPLACE System
Please use the following documents to lead you through the installation procedure for SIPLACE System.
3.2 SIPLACE Setup Center 2.3
The installation procedure is divided into several parts (see the following Figure):
1. Installation of hardware
Barcode scanner
– Dragon Scanner's Cradle or Symbol MC70 2D barcode scanner
Optional: Docking Station
2. Installation of software
Setup Center, with setup type
–GUI
– Database
– Complete
Setup Center "Forced Setup Verification"
3. Settings
Station software, see SIPLACE Setup Center 2.3 User Guide (item no. 00195402-xx)
Dragon Scanner or Symbol MC70 2D Barcode scanner (see the chapter "Scanner Configuration")
Setup Center, see SIPLACE Setup Center 2.3 Getting Started (item no. 00195518-xx)
SIPLACE Pro, see SIPLACE Setup Center 2.3 User Guide (item no. 00195402-xx)
Barcode Label Wizard, see SIPLACE Setup Center 2.3 User Guide (item no. 00195402-xx)
Navigation Guide for Installation
SIPLACE Setup Center 2.3
10 Installation Manual SIPLACE Setup Center 2.3
System components and configurations
Setup Center System components
Installation Manual SIPLACE Setup Center 2.3
11
4 System components and configurations
4.1 System components
4.1.1 Setup Center
A complete installation of SIPLACE Setup Center requires:
SIPLACE Pro Interface and SIPLACE Pro Desk
SIPLACE Setup Center consists of the following components:
SIPLACE Setup Center GUI
SIPLACE Setup Center Database
Database Backup Tool
Error Reporting Tool
In addition the following tools can be installed:
Setup Selection Assistant
SIPLACE Pro Trace Config Assistant
4.1.2 Scanner system
4.1.2.1 Dragon Scanner
The Setup Center supports the radio-controlled scanner system "Dragon M101" by Datalogic. This
scanner has a four-line display and supports 1D barcodes only.
Communication between the scanner and the Setup Center requires the cradle "OM-Dragon". This is
connected to the Setup Center PC via the serial port. Each Setup Center GUI supports one cradle. Up
to 32 scanners can be linked to one cradle. Setup Center supports simultaneous operation with multiple
scanners.
The barcode types supported in standard configuration are:
EAN 8/EAN 13/UPC A/UPC E
Interleaved 2/5
Code 39
Code 128
Code 93
4.1.2.2 Symbol MC70
The Setup Center supports the 2D barcode scanning with the "Symbol MC70" scanner, equipped with
2D scan engine, usable with 2,4 GHz and 5 GHz WLAN.
2D barcodes contains more information than 1D barcodes. The support for 2D barcode scanners
enables the operator to scan more packaging information at same time.
The following barcode types are supported by the scanner software:
Code 39, Code 128, Code 93, Codabar, Code 11
Interleaved 2 of 5,
Discrete 2 of 5,
MSI,
UPC/EAN family (EAN-8, EAN-13, EAN-128, UPC-A, UPC-E, UPC/EAN supplementals),
Coupon Code,