00195397-01_Installation Manual Setup Center 2.3 - 第42页

Installation Hardware Installation Optional: Docking Station 42 Installation Manual SIPLACE Setup Center 2.3 Connection Example 1 and 2 5-15: Connection example 1 and 2: CAN bus cable Compressed Air and Po wer Supplies X…

Installation

Optional: Docking Station Hardware Installation

Installation Manual SIPLACE Setup Center 2.3

Connection Example 2

5-14: Connection example 2: CAN bus cable

NOTE:

The integrated terminal resistor can be connected and simultaneously connects / disconnects

the outgoing bus cable when deactivating / activating. This allows an easy start up of the bus

system one segment at a time.

Installation

Hardware Installation Optional: Docking Station

42 Installation Manual SIPLACE Setup Center 2.3

Connection Example 1 and 2

5-15: Connection example 1 and 2: CAN bus cable

Compressed Air and Power Supplies

X Connect to the compressed air supply.

X Set the pressure reducer on the pneumatic connection (external) to 5.5 bar.

X Switch off the power supply and connect the CAN Bus cable to the device.

NOTE:

The terminating resistors are activated via the slide switch (XXXXXX) at the starting and final

point of the bus system. At the same time the connection points (2C+ / 2C-) for the outgoing bus

cable are switched off.

At all other nodes of the bus system the corresponding terminating resistor must be activated!

NOTE:

The compressed air and power connections can be found on the back of the docking station.

DANGER:

Never cover the air discharge opening in the integrated fan and the ventilation slits on the side

of the device!

Covering these could lead to overheating and destruction of the power pack.

Installation

Optional: Docking Station Hardware Installation

Installation Manual SIPLACE Setup Center 2.3

X Switch on the power supply.

X You will find a control lamp on the front of the device. This will shine when power is correctly supplied

to the device.

5.2.4.5 Firmware download for docking station

X Setup Center 2.3 can update the firmware of your docking station.

To learn how to update the firmware of your docking station, please refer to the chapter "Docking

Station Firmware Download" of the document User Guide Setup Center 2.3, item no. 00195402-xx.

DANGER:

Make sure that nobody is using the connected component trolley when you switch the power on.

5-16: Docking station: compressed air and power supplies

Legend:

1. Compressed Air Connection

2. Power Connection

3. Set Compressed Air