ysm20r_cabpara - 第13页

19 9. W arranty YSM20R (SESMK18400-00) v2.001 9. W arranty 9.1 W arr anty period The warranty period of the product ends when any of the following applies (whichever comes first). -1- One year elapses from the time of in…

8. Inspection and acceptance

YSM20R (SESMK18400-00) v2.001

8. Inspection and acceptance

8.1 Inspection before shipment

The product is inspected with the customer attended at YAMAHA’s factory before shipment. After this

attendance inspection is considered as accepted, the product is shipped to the factory site designated by the

customer.

The following describes the inspection items, inspection methods, and acceptance criteria.

-1- Inspection items

Units and quantities making up this equipment and other conditions stated in the delivery specification shall

be satisfied.

-2- Inspection methods

The mounting test is performed using the materials under the conditions described below.

Board for attendance inspection YAMAHA test boards

Customer boards.

* If customer boards are to be used,

please send the boards and

coordinate data (and the

components as well, in some

cases) to Yamaha at least 2 weeks

prior to the inspection date.

Component securing method Two-sided adhesive tape.

Witnessed inspection components

As a general rule, the following components

shall be used for the witnessed inspection:

Standard Yamaha square components (0603,

1005, 1608, 2012, 3216; "mm" sizes), and

mini-mold TR & SOP components.

In some cases, dummy SOP and dummy QFP

components may also be used.

* Unless otherwise specified, Yamaha shall

prepare the above components.

* Separate consultations shall be

required if the customer's

components or special components

are to be used.

Number of mountings Total of 2,500 or more components.

Acceptance criteria

No component mounting errors shall occur in

the above inspection process (including

recovery operations).

* The components to be mounted in the witnessed

inspection may be changed depending on the

device specifications (cameras, nozzles, feeders,

etc.).

* When the 0402 square chip component ("mm"

size) is included in the inspections, separate

consultation is required regarding the component

supply method and evaluation standard.

8.2 Inspection after installation

After "8.1 Inspection before shipment" has been considered as accepted, the product is shipped to the factory

site designated by the customer and the delivery work is conducted. After the installation and adjustment

work have been completed at the installation site, the inspection with the same contents as described in "8.1

Inspection before shipment" is performed. This inspection is called "Inspection after installation".

8.3 Acceptance

In the same manner as "8.1 Inspection before shipment" described above, when the results of "8.2 Inspection

after installation" satisfy the acceptance criteria, the product is considered as accepted.

9. Warranty

YSM20R (SESMK18400-00) v2.001

9. Warranty

9.1 Warranty period

The warranty period of the product ends when any of the following applies (whichever comes first).

-1- One year elapses from the time of installation.

-2- 18 months elapse from the time of shipment from YAMAHA’s factory

-3- Total operation hours reach 5,000 hours.

9.2 Warranty coverage and contents

The following describes the warranty coverage and contents.

-1- The warranty coverage of the product is the portions that are described as normal contents of this

delivery specification, that is, the contents stated in "1. Machine configuration" and "3. Arrangements".

The warranty coverage does not include the contents of "2. Custom-order specifications and specific

items". The warranty coverage of the custom-order specifications and specific items shall be discussed

separately.

-2- If any defect or trouble due to YAMAHA’s design or workmanship is found in machine unit, software,

or genuine part, that has been delivered to the customer’s factory with YAMAHA's Scope of

responsibility and considered as accepted, during the warranty period, YAMAHA shall repair or replace

the defective unit, software, or genuine part free of charge.

-3- YAMAHA shall not accept the customer’s compensations for any incidental or consequential losses,

losses due to absence from work, faulty product production, cost losses, and sales opportunity losses

(lost earnings).

-4- If the customer receives a claim regarding compensations for losses due to infringement on patent right,

intellectual property right, or other right resulting from use of products that the customer has

manufactured using this equipment, software, and genuine parts from a third party, YAMAHA shall not

accept the customer’s compensations.

-5- The contents described in this specification explain the specifications of this equipment.

YAMAHA does not warrant or permit the operation of a third person’s patent right, intellectual property

right or other rights.

9. Warranty

YSM20R (SESMK18400-00) v2.001

9.3 Exception to warranty

The coverage of this warranty does not include the following terms even during the warranty period.

-01- Defects arising from earthquake, tsunami, lightning, wind or flood damage, or other natural disaster or

force majeure.

-02- Malfunctions and damages arising from fire, pollution, salt damage, dew condensation, or unusual

voltage.

-03- Defects arising from collision, fall, drop, or other accident.

-04- Deteriorations or defects arising from secular change.

Example: Paint or plated portion is discolored or rusted.

-05- Defects arising from worn-out consumable part during normal operation.

Example: Deterioration of consumable parts specified in separate manuals (user’s and maintenance

manuals, and component drawing and list).

-06- Sensuous symptoms, such as sound or vibration that do not adversely affect the quality and functions.

(Unusual noise or excessive vibration is handled separately.)

Example: Controller operation sound or motor rotation sound.

-07- Defects arising from environmental conditions.

Example: Defects arising from air supply source including impurity, oil mist, dew condensation, or dust

or dirt in the atmosphere.

-08- Defects arising from improper environmental conditions, or secular change or deterioration of

environmental conditions.

Example: Equipment vibration arising from installation floor surface with insufficient strength or

defects arising from inclination or deformation of installation floor surface.

-09- Defects arising from negligence, misuse, or mistake of correct operation procedures instructed in the

manuals.

-10- Defects arising from negligence, incomplete steps, mistake of inspection and maintenance procedures

instructed in the manuals.

-11- Problems which occur due to the use of non-Yamaha components (e.g., nozzles) and part supply units

(tape feeders, etc.).

-12- Defects arising from use of lubricants (oil and grease, etc) other than those specified.

-13- Defects arising from modification or specification change made by the customer.

-14- Defects arising from repair or maintenance work made by personnel other than YAMAHA’s engineers

or those specified by YAMAHA.

-15- Defects arising from careless storage at the customer’s factory or warehouse during the storage period.

-16- Defects arising from movement, relocation, or resale without prior notification to YAMAHA after

completion of the acceptance inspection.

-17- Defective parts that have been replaced free of charge are not returned to the place specified by

YAMAHA within 30 days.

* To locate the cause of the trouble, it is necessary to investigate the defective parts. So, please return

the replaced parts as soon as possible.