ysm20r_cabpara - 第15页
21 10. Safety YSM20R (SESMK18400-00) v2.001 10. Safety 10 .1 Overview This equipment is an industrial machine dedicate d to indoor use only . T o ensure that the machine you purchased is used safely and correctly , alway…
20
9. Warranty
YSM20R (SESMK18400-00) v2.001
9.3 Exception to warranty
The coverage of this warranty does not include the following terms even during the warranty period.
-01- Defects arising from earthquake, tsunami, lightning, wind or flood damage, or other natural disaster or
force majeure.
-02- Malfunctions and damages arising from fire, pollution, salt damage, dew condensation, or unusual
voltage.
-03- Defects arising from collision, fall, drop, or other accident.
-04- Deteriorations or defects arising from secular change.
Example: Paint or plated portion is discolored or rusted.
-05- Defects arising from worn-out consumable part during normal operation.
Example: Deterioration of consumable parts specified in separate manuals (user’s and maintenance
manuals, and component drawing and list).
-06- Sensuous symptoms, such as sound or vibration that do not adversely affect the quality and functions.
(Unusual noise or excessive vibration is handled separately.)
Example: Controller operation sound or motor rotation sound.
-07- Defects arising from environmental conditions.
Example: Defects arising from air supply source including impurity, oil mist, dew condensation, or dust
or dirt in the atmosphere.
-08- Defects arising from improper environmental conditions, or secular change or deterioration of
environmental conditions.
Example: Equipment vibration arising from installation floor surface with insufficient strength or
defects arising from inclination or deformation of installation floor surface.
-09- Defects arising from negligence, misuse, or mistake of correct operation procedures instructed in the
manuals.
-10- Defects arising from negligence, incomplete steps, mistake of inspection and maintenance procedures
instructed in the manuals.
-11- Problems which occur due to the use of non-Yamaha components (e.g., nozzles) and part supply units
(tape feeders, etc.).
-12- Defects arising from use of lubricants (oil and grease, etc) other than those specified.
-13- Defects arising from modification or specification change made by the customer.
-14- Defects arising from repair or maintenance work made by personnel other than YAMAHA’s engineers
or those specified by YAMAHA.
-15- Defects arising from careless storage at the customer’s factory or warehouse during the storage period.
-16- Defects arising from movement, relocation, or resale without prior notification to YAMAHA after
completion of the acceptance inspection.
-17- Defective parts that have been replaced free of charge are not returned to the place specified by
YAMAHA within 30 days.
* To locate the cause of the trouble, it is necessary to investigate the defective parts. So, please return
the replaced parts as soon as possible.
21
10. Safety
YSM20R (SESMK18400-00) v2.001
10. Safety
10.1 Overview
This equipment is an industrial machine dedicated to indoor use only.
To ensure that the machine you purchased is used safely and correctly, always comply with the instructions
and rules in separate manual regarding safety.
To maintain the safety of the operator or person working with this machine, it is essential that it (including
external parts feeders) be installed correctly in compliance with the safety standards and onditions of that
country.
Complying with the safety regulations and laws of that country is the responsibility of the customer who
purchased this machine. The supervisor of this machine must take responsibility to ensure all measures have
been taken for machine safety.
10.2 Ensuring the safety
The following describes typical safety instructions, such as warnings and cautions to ensure the safety. For
details, check the manuals.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
These are points most essential for protecting the safety of the machine operator, inspector and service
personnel.
Pictorial symbol put down with warning messages
== Examples of warning massages ==
• Never allow any part of your body (hand or head, etc.) to enter within the machine movement range
during operation.
• Safety devices (safety interlocks) that stop machine operation should always be in good operating
condition.
• Always shut off the power and air supply before replacing parts or performing repairs.
• During teaching or when making machine adjustments, always keep alert so that you can stop the
machine whenever needed.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor injury, or material loss
or damage to the machine. These points are important for protecting the safety of the machine and data, etc.
Pictorial symbol put down with caution messages
== Examples of caution messages ==
• The work person operating the machine must have been trained in correct machine operation and safety.
• If the component supply unit is installed without stopping the machine, this may cause a part of your
body to be entangled in the machine.
22
10. Safety
YSM20R (SESMK18400-00) v2.001
10.3 Warning labels
To use the YAMAHA machines safely and correctly, warning labels are attached to the machine body and
peripheral equipment. Check that the information on each warning label is clearly legible and comply with
the instructions.
The following 3 types of marks are used on warning labels. Each mark has its own meaning and is typically
used with a pictogram to emphasize the message.
Usage examples
Prohibition mark Instruction mark
WARNING WARNINGWARNING
Mark and pictogram
Marks and examples used with pictogram
Definition Shape/Color
Meaning of the above
examples
Warning
Indicates a hazard, how to
avoid the hazard, and potential
consequences of ignoring the
warning.
Yellow triangle with black
border. Pictogram is black on
yellow.
Risk of electrical shock
Prohibition
Indicates a prohibited action to
avoid the potential hazard.
Red circle with slash. Pictogram
is black and located behind
slash.
Do not modify or disassemble
safety cover switch.
Instruction
Indicated an action that must
be taken to avoid the potential
hazard.
Blue circle. Pictogram is white
on blue.
Read the manual to understand
procedure bef
ore starting
operation.
Warning mark
10.4 Warnings regarding strong magnetic fields
Some machines contain parts generating strong magnetic fields which may cause death, bodily injury, or
device malfunction. Always comply with the following instructions.
* Persons wearing a pacemakers and/or hearing aids or other electronic medical devices should stay
away from the head at all times.
* Persons with implants of magnetic metal should stay away from the head at all times.
* Keep all iron and steel items such as tools and screws, etc., away from strong magnetic field warning
areas.
* Keep items such as magnetic cards, etc., which could be damaged by magnetic forces away from the
head.
Ferromagnetic field warning label