ysm20r_cabpara - 第46页

52 12. General specications YSM20R (SESMK18400-00) v2.001 [GA TE OUT] : When this machine is rea dy for operation, it outputs this board unloading r equest ON (conduct) signal to the pre-process machine. [BUSY OUT] : Th…

12. General specications

YSM20R (SESMK18400-00) v2.001

12.12.2

Machine-to-machine signal specifications

(between this machine and re-process machine)

* Previous Interface

According to the operating conditions, such as machine combination and signal cable selection, make

appropriate selections from the table shown below.

These specifications must match the selected settings in "12.12.1 Machine-to-machine signal specifications"

(between this machine and post-process machine: Next interface).

* When connecting to other company’s machine, the customer shall be held responsible for maintenance of

the functions related to other company’s machine.

Selection

Next interface Connector on

this machine AMP: 206043-1

(Receptacle, 14 pins)

GATE signal

specifications

ADVANCED (extended)

GATE specifications

ADVANCED (extended)

GATE 2 specifications

SMEMA signal

specifications

YAMAHA YV series or

earlier (YV or earlier)

and other company’s

machine

YAMAHA X series or

later

(X / Xg / YG / YS)

YAMAHA YS series (YS)

or later *1

SMEMA signal

compatible

machine

Class Signal name Signal name Signal name Signal name

Relay

contact

output

Conducted

/ Closed

when

turned ON.

GATE

OUT

(output)

Board

unloading

request signal

output to the

pre-process

machine

BUSY

OUT

(output)

Status signal

output showing

that this

machine is

loading the

board.

Same as left

SMEMA

specifications

Relay

contact

output

GATE

OUT

(output)

BUSY

OUT

(output)

3 DC +24V Not used.

BA IN

(com)

Status signal

input showing

that the

pre-process

machine is ready

to unload the

board.

Same as left

PNP input

(Judged as ON when

the voltage is +24V.)

Not used.

BA IN

(input)

ncorrect

connection

prevention

function

application

Dedicated to mating

designation (Receivable)

Dedicated to mating

designation (Receivable)

Dedicated to mating

designation (Receivable)

Key plug

inserted.

Dedicated to mating

designation (Blocked)

Dedicated to mating

designation (Blocked)

Dedicated to mating

designation (Blocked)

7 Reserved. Reserved. Reserved. Reserved.

8 Reserved. Reserved. Reserved. Reserved.

9 DC +24V Not used.

UR IN

(com)

Status signal

input showing

that the

pre-process

machine is

running in the

automatic

operation mode.

Same as left.

PNP input

(Judged as ON when

the voltage is +24V.)

Not used.

UR IN

(input)

Relay

contact

output

Conducted

/ Closed

when

turned ON.

Not used.

LR OUT

(output)

Status signal

output showing

that this

machine is

running in the

automatic

operation

mode.

Same as left.

Relay

contact

output

Not used.

LR OUT

(output)

Relay

contact

output

Conducted

/ Closed

when

turned ON.

Not used. Not used.

LE OUT

LS OUT

(output)

Machine-to-

machine board

standby status

signal output to

the pre-process

machine or board

carry-in priority

lane selection

signal output

during dual-lane

operation

Relay

contact

output

Not used. Not used.

LE OUT

LS OUT

(output)

*1 : The YS / YG series mounters have already been applicable to the ADVANCED GATE 2 specifications

from the machines shipped in November, 2009. When connecting the YS / YG series mounter shipped

before this date to the line, the machine (except for YS24) needs to be modified.

12. General specications

YSM20R (SESMK18400-00) v2.001

[GATE OUT] : When this machine is ready for operation, it outputs this board unloading request ON

(conduct) signal to the pre-process machine.

[BUSY OUT] : This output signal informs the pre-process machine that this machine is loading a board.

[BA IN] : This input signal informs this machine that the pre-process machine is ready to unload a board.

The pre-process machine output is a relay contact (dry contact : no-voltage circuit).

[UR IN] : This input signal informs this machine that the pre-process machine is running in automatic mode.

The pre-process machine output is a relay contact (dry contact: no-voltage circuit).

[LR OUT] : This output signal informs the pre-process machine that this machine is running in automatic

mode.

[LE OUT] : This signal is used for the Advanced (extended) GATE 2 specifications when the "inter-machine

board standby function" used between mounters is enabled. This output signal informs the pre-

process machine that a board is at the standby position between this machine and pre-process

machine. The cable with a yellow marking put close to the connector should be used for the

machine-to-machine cable.

[LS OUT] : This signal is used for the Advanced (extended) GATE 2 signal specifications only when the

"priority lane signal output" setting is enabled.

When using the dual-lane, this output signal is used to select the priority lane on the pre-process

machine that unloads the next board. (Example of pre-process machine: dual-lane branching

conveyors, solder printers, etc.) The cable with a yellow marking put close to the connector should

be used for the machine-to-machine cable.

Machine-to-machine signal specifications (between this machine and pre-process machine)

* Previous Interface

Relay output

DC+24V

PNP input

Input

Relay output

Input

Relay output

Input

I/O BOARD

Previous Interface on this machineNext Interface on pre-process machine

Previous Interface connector

AMP: 206043-1

(Receptacle 14 pins)

12. General specications

YSM20R (SESMK18400-00) v2.001

12.13 Carriage type tray supply unit

The cATS10 is compatible with the YSM20R-2 and YSM20R-1, and can be installed on the front and rear of

the machine.

Unit cATS10 (Carriage type tray supply unit)

Type KLX-000, KLX-100

Outline dimensions L480 x W870 x H1,150 mm

Weight Approx. 160kg

Power supply / air supply source Supplied from this machine

Component pickup head See the illustration on the following page.

Component supply format Tray loaded components

Maximum tray size L335 x W230mm

Allowable height <Tray + components>

* Height of mountable components

depends on the head type. For details,

see "11.5.1 Height of mountable

components".

With a 12.5mm pallet pitch 8.5mm or less

With a 25mm pallet pitch 20mm or less

With a 37.5mm pallet pitch 32mm or less

Number of component types

Number of magazine racks that can be stored: 1 set

Number of pallets that can be stored: Maximum of 10

* Each magazine rack can be replaced at a time.

Maximum loading weight

Maximum loaading weight (940g) = Standard pallet (approx. 440g) + tray and

electronic components (500g or less)

* When special-order pallets are used, check the weight of each pallet itself.

1150

123

740

905

316

558

868

427

479

* The magazine racks and pallets are available in two types: standard type and IT-Option type (with

barcode).

* The pallets used for the cATS are identical with the YS pallets.

* One recovery pallet (option) can be used in each magazine rack.

Select using QFP recovery pallet in "1. Machine Configuration".