ysm20r_cabpara - 第49页

55 12. General specications YSM20R (SESMK18400-00) v2.001 Relationship bet ween the tray size / pallet are a and the component pickup hea ds (Common cA TS10 and sA TS30) YSM20R-2 HM head T able B 310 210 337 12 250 H10 …

100%1 / 81
54
12. General specications
YSM20R (SESMK18400-00) v2.001
12.14 Fixed type tray supply unit
sATS30 and sATS30NS are compatible with the YSM20R-2 and YSM20R-1, and can be installed on the front
and rear of the machine.
Unit
sATS30
(Fixed type tray supply unit)
sATS30NS
(ATS for nonstop tray replacement)
Type KMA-000 KMH-000
Outline dimensions L562 x W899 x H1,542 mm L562 x W1,187 x H1,542 mm
Weight Approx. 250kg Approx. 290kg
Power supply / air supply source Supplied from this machine
Component pickup head See the illustration on the following page.
Component supply format Tray loaded components
Compatible tray size L335 x W230mm or smaller
Allowable height <Tray + components>
* Height of mountable components
depends on the head type.
For details, see "11.5.1 Height of
mountable components".
With a 12.5mm
pallet pitch
8.5mm or less
With a 25mm
pallet pitch
20mm or less
With a 37.5mm
pallet pitch
32mm or less
Number of component types
Number of magazine racks that can
be stored: 2 set
Number of pallets that can be stored:
Maximum of 30
* Each magazine rack can be replaced at a time.
Number of magazine racks that can
be stored: 2 set
Number of pallets that can be stored:
Maximum of 30
* Allow pallet supply at any time by supply station.
Maximum loading weight
Maximum loaading weight (940g) = Standard pallet (approx. 440g) + tray and
electronic components (500g or less)
* When special-order pallets are used, check the weight of each pallet itself.
sATS30 sATS30NS
562
1542
120
455
899
745
905
77385
54525
562
1572
120
407
1187
745
905
525 347
400
330
* The magazine racks and pallets are available in two types: standard type and IT-Option type (with
barcode).
* The pallets used for the cATS are identical with the YS pallets.
* One recovery pallet (option) can be used in each magazine rack.
Select using QFP recovery pallet in "1. Machine Configuration".
55
12. General specications
YSM20R (SESMK18400-00) v2.001
Relationship between the tray size / pallet area and the component pickup heads
(Common cATS10 and sATS30)
YSM20R-2 HM head
Table B
310
210
337
12
250
H10
H9
Components in this area can
be picked up with all heads.
Components in this area cannot
be picked up with any head.
Components in this area can be
picked up with heads H1 to H8,
but cannot be picked up with
heads H9 and H10.
Table A
210
310
250
337
12
H10
H9
Components in this area can be
picked up with heads H1 to H8,
but cannot be picked up with
heads H9 and H10.
Components in this area can
be picked up with all heads.
Components in this area cannot
be picked up with any head.
56
12. General specications
YSM20R (SESMK18400-00) v2.001
YSM20R-2 FM head
Table B
316
210
337
250
H5
Components in this area can
be picked up with all heads.
Components in this area cannot
be picked up with any head.
Components in this area can be
picked up with heads H1 to H4,
but cannot be picked up with
head H5.
Table A
210
316
250
337
H5
Components in this area can be
picked up with heads H1 to H4,
but cannot be picked up with
head H5.
Components in this area can
be picked up with all heads.
Components in this area cannot
be picked up with any head.