ysm20r_cabpara - 第5页

11 4. After-sales service (Japanese market) YSM20R (SESMK18400-00) v2.001 4. After-sales service (Japanese market) When the equipment is installed in Japan, six kin ds of after -sales service plans that are conducted by …

100%1 / 81
12. General specications 35
12.1 Safety design ……………………………………………………………………… 35
12.2 Emergency stop and error detection systems …………………………… 35
12.3 Pause (interlock) system and error detection system ………………… 36
12.4 Machine status indication ……………………………………………………… 36
12.5 Basic operation of machine …………………………………………………… 37
12.6 Language used for operation screen and user’ s manual …………… 37
12.7 Conguration of servo control axes ………………………………………… 38
12.8 Conguration of other motors ……………………………………………… 40
12.9 Vision system (image recognition) …………………………………………… 41
12.9.1 Fiducial camera …………………………………………………………………… 41
12.9.2 Scan camera (standard for HM head) ……………………………………… 42
12.9.3 Multi-view camera (standard for FM head / option for HM head) … … 42
12.9.4 Multi-view camera with coplanarity checker (option) …………………… 43
12.9.5 Side-view camera ………………………………………………………………… 43
12.9.6 Smart recognition………………………………………………………………… 44
12.10 Feeder bank conguration …………………………………………………… 45
12.11 Feeder lane conguration ……………………………………………………… 47
12.12 Signal specications …………………………………………………………… 49
12.12.1
Machine-to-machine signal specications
(between this machine
and post-process machine) ………………………………………………………………… 49
12.12.2
Machine-to-machine signal specications
(between this machine
and re-process machine) …………………………………………………………………… 51
12.13 Carriage type tray supply unit ………………………………………………… 53
12.14 Fixed type tray supply unit …………………………………………………… 54
12.15 Recovery pallet …………………………………………………………………… 60
13. References and details 62
13.1 Layout conguration …………………………………………………………… 62
13.2 Nozzle 66
13.3 Nozzle station……………………………………………………………………… 70
13.3.1 For HM Head Nozzle station (2-beam specs.) …………………………… 70
13.3.2 For FM Head Nozzle station (2-beam specs.) …………………………… 71
13.3.3 For HM Head Nozzle station (1-beam specs.) …………………………… 72
13.3.4 For FM Head Nozzle station (1-beam specs.) …………………………… 73
13.4 Feeder …………………………………………………………………………… 74
13.4.1 ZS Feeder ………………………………………………………………………… 74
13.4.2 SS Feeder ………………………………………………………………………… 78
13.4.2 Feed pitch by feeder button operation …………………………………… 81
11
4. After-sales service (Japanese market)
YSM20R (SESMK18400-00) v2.001
4. After-sales service (Japanese market)
When the equipment is installed in Japan, six kinds of after-sales service plans that are conducted by
YAMAHA about one year after installation of the equipment are available as described below according to
the customer’s requests and the specifications of the target machine units.
Availability
Class Name Target
Work schedule
at site
Periodic after-sales call
Discount
right
YAMAHA’s
machine is
installed for
the first time.
Plan S Normal machine specifications Five days
One month / Two months /
Three months
One-year
inspection
Plan Si IT option specifications Five days
One month / Two months /
Three months
One-year
inspection
YAMAHA’s
machine has
already been
installed.
Plan A Normal machine specifications Three days
One month / Two months /
Three months
One-year
inspection
Plan Ai
IT option specifications
(first time)
Five days
One month / Two months /
Three months
One-year
inspection
Plan Bi
IT option specifications
(second or subsequent time)
Four days
One month / Two months /
Three months
One-year
inspection
Plan C
Normal machine specifications
(cost reduction plan)
Two days
One month / Two months /
Three months
One-year
inspection
* The contents of the work schedule at site are that YAMAHA installs and adjusts the relevant machine and
follows up the customer’s production start-up.
* The after call (only Japan) will telephone from YAMAHA’s CS Section SMT Group.
* The one-year inspection(charged base) is announced from your distributor or special agent when ten
months have elapsed after installation of the machine.
When the customer requires the one-year inspection, the schedule is adjusted, the telephonic diagnosis is
conducted, and the one-year inspection is carried out in the 12th to 14th month after installation of the
machine. At this time, the basic work cost is specially discounted (limited time offer).
* The work beyond the scope of the one-year inspection is estimated separately.
* After the after-sales service shown above has been expired, YAMAHA will offer the periodic maintenance
service or individual after-sales service that is proposed separately.
12
5. Scope of construction work and service
YSM20R (SESMK18400-00) v2.001
5. Scope of construction work and service
The following table describes the work allocation between the customer and YAMAHA.
Actually, this table summarizes the scope of the construction work, service, and utility.
So, the customer needs to check this table.
No. Item YAMAHA Customer Remarks
01 Design and manufacture of machine units
02 Transportation of product
03 Unloading of product
04 Transportation inside work site
05 Dew condensation prevention
06 Securing of transportation route
07
Preparations for power source and air
supply source
Including connections to target products
08 Network
Including anti-virus measures
09 Installation environment
Including foundation construction work
10 Inspection before shipment
Including preparations for materials when
YAMAHA’s standard attendance inspection is
conducted.
11 Installation and adjustment work
12 Inspection after installation
Including preparations for materials when
YAMAHA’s standard attendance inspection is
conducted.
13 Operation training
14 Safety management
15 After-sales service
* If there are items other than YAMAHA’s standard items, such as changing of attendance inspection
conditions, they shall be informed beforehand and discussed separately.