ysm20r_cabpara - 第7页
13 6. Preconditions YSM20R (SESMK18400-00) v2.001 6. Preconditions 6.1 Eff ective area This specification assumes that Y AMAHA MOTOR Co., Ltd. (hereafter referred to as "Y AMAHA") or an association entrusted by…
12
5. Scope of construction work and service
YSM20R (SESMK18400-00) v2.001
5. Scope of construction work and service
The following table describes the work allocation between the customer and YAMAHA.
Actually, this table summarizes the scope of the construction work, service, and utility.
So, the customer needs to check this table.
No. Item YAMAHA Customer Remarks
01 Design and manufacture of machine units
02 Transportation of product
03 Unloading of product
04 Transportation inside work site
05 Dew condensation prevention
06 Securing of transportation route
07
Preparations for power source and air
supply source
Including connections to target products
08 Network
Including anti-virus measures
09 Installation environment
Including foundation construction work
10 Inspection before shipment
Including preparations for materials when
YAMAHA’s standard attendance inspection is
conducted.
11 Installation and adjustment work
12 Inspection after installation
Including preparations for materials when
YAMAHA’s standard attendance inspection is
conducted.
13 Operation training
14 Safety management
15 After-sales service
* If there are items other than YAMAHA’s standard items, such as changing of attendance inspection
conditions, they shall be informed beforehand and discussed separately.
13
6. Preconditions
YSM20R (SESMK18400-00) v2.001
6. Preconditions
6.1 Effective area
This specification assumes that YAMAHA MOTOR Co., Ltd. (hereafter referred to as "YAMAHA") or an
association entrusted by YAMAHA is an interested party in Japan
In a foreign country outside Japan, the contract concluded by the overseas distributor and customer takes
precedence over this specification. So, the contents of this specification become the reference information.
6.2
Export control by the Foreign Exchange and Foreign Trade Control Law
Products and technologies described in this specification are applicable to the control defined in Japanese
Security Trade Control Laws, such as Foreign Exchange and Foreign Trade Control Law. So, such laws
should be observed strictly. Even when YAMAHA submits the Certificate of Non-Applicability (parameter
sheet) about the products and technologies described in this specification to your company, your company
shall be held responsible for judgement of the final non-applicability. Additionally, when the specifications
of the products and technologies described in this specification are changed or when the products or
technologies are built-into other products, this Certificate of Non-Applicability cannot be used.
6.3 Re-export control by the U.S. Government
The products, technologies, and software described in this specification may include U.S. origin products.
Therefore, the re-export control by the U.S. Government shall be observed strictly.
6.4 European region
To export the product to a European country, it is necessary that the product shall conform to the EC machine
directives and EMC directives (CE marking compliance).
For details, see "10.7 CE marking" described later.
6.5 Intellectual property right
The contents described in this specification explain the product specifications.
YAMAHA does not warrant or permit the operation of a third person’s intellectual property right or other
rights.
6.6 Industrial machine dedicated to indoor use
The product described in this specification is an industrial machine dedicated to indoor use. For operation of
the product, various detailed conditions that are described later shall be confirmed.
In particular, the descriptions regarding the safety shall be read thoroughly to strictly observe them.
6.7 Improvement
The contents described in this specification are subject to change without prior notice due to continual
improvement of the product or software.
6.8 Registered trademark
Microsoft, Windows, and Excel are registered trademarks of Microsoft Corporation in the United States and
/ or other countries.
14
6. Preconditions
YSM20R (SESMK18400-00) v2.001
6.9 Resale
When the owner of the product is changed after relocating or reselling the product described in this
specification or the product is relocating the product to another country, the after-sales service and warranty
contents become invalid afterwards.
If the after-sales support is required, the after-sales support service can be continued by concluding the
service contract with our company or one of our distributors.
6.10 Relocation
Please contact YAMAHA or your distributor prior to relocating the product to another country, even if the
product ownership remains unchanged. YAMAHA will investigate to determine the appropriate relocation
work, and will check to see how the relocation will affect the after-sales service and warranty content.
Please note that all after-service and warranty content becomes invalid if the product is exported to another
country.
If desiring a continuation of after-service in such cases, a new service contract must be made with the local
distributor.
6.10 Reproduction of documents without permission
No part of this specification may be reproduced (copied) without written permission of YAMAHA.
6.11 Establishment date
This specification describes the contents established as of September, 2018.