ysm20r_cabpara - 第9页

15 7. Preparations and installation YSM20R (SESMK18400-00) v2.001 7. Preparations and installation When the cust omer arrange s a transpor tation company , be sure t o thoroughly unders tand the responsible ar ea (condit…

6. Preconditions

YSM20R (SESMK18400-00) v2.001

6.9 Resale

When the owner of the product is changed after relocating or reselling the product described in this

specification or the product is relocating the product to another country, the after-sales service and warranty

contents become invalid afterwards.

If the after-sales support is required, the after-sales support service can be continued by concluding the

service contract with our company or one of our distributors.

6.10 Relocation

Please contact YAMAHA or your distributor prior to relocating the product to another country, even if the

product ownership remains unchanged. YAMAHA will investigate to determine the appropriate relocation

work, and will check to see how the relocation will affect the after-sales service and warranty content.

Please note that all after-service and warranty content becomes invalid if the product is exported to another

country.

If desiring a continuation of after-service in such cases, a new service contract must be made with the local

distributor.

6.10 Reproduction of documents without permission

No part of this specification may be reproduced (copied) without written permission of YAMAHA.

6.11 Establishment date

This specification describes the contents established as of September, 2018.

7. Preparations and installation

YSM20R (SESMK18400-00) v2.001

7. Preparations and installation

When the customer arranges a transportation company, be sure to thoroughly understand the

responsible area (conditions) and make the judgement.

See section "7.1" to "7.1.5", Responsible area when YAMAHA arranges the transportation company.

See section "7.2", Responsible area when the distributor or customer arranges the transportation company.

7.1

Responsible area when YAMAHA arranges the transportation company.

The transportation company designated by YAMAHA transports the product to the factory site designated by

the customer.

7.1.1 Unloading the product

To unload the product, the transportation company designated by YAMAHA unloads the product using heavy

machines, such as forklift, crane, and car gondola prepared by the customer.

If the customer is difficult to prepare heavy machines, contact YAMAHA at least one week before the

delivery date.

7.1.2 Transportation within factory site

To transport the product within the customer’s factory site, YAMAHA or the transportation company

designated by YAMAHA transports the product to the installation place at YAMAHA’s own risk. If the

customer unloads and transports the product for some reason, this shall be conducted at the customer’s own

risk.

7.1.3 Securing a delivery route

A delivery route necessary to transport the product is secured. In particular, securing of the opening width,

elimination of stepped portions, securing of the installation place, and relocation of other equipment are

conducted at the customer’s own risk. For details about the width of the opening, see "11. Major

specifications", 11.1 "Outline dimensions" described later.

7.1.4 Dew condensation prevention

To transport the product from a cold environment (about 10°C or less) to a temperature regulated

environment, such as clean room (about 20°C or more), it is necessary to install the product while gradually

balancing the product temperature so as to prevent dew condensation.

In this case, a temporary placing space suitable for the temperature balancing work needs to be secured.

However, when a truck with the temperature regulation function is used, this temperature balancing work is

not needed. When the customer requests this type of truck, YAMAHA will arrange it.

7.1.5 Collection of transportation tools and gears

After the transportation has been completed, the transportation company designated by YAMAHA collects

the waste packing materials, hand lifters, and curing materials.

On the delivery date, the transportation company’s staffs wait until completion of the production line startup

work (waiting at local site until 16:00).

7. Preparations and installation

YSM20R (SESMK18400-00) v2.001

7.2

Responsible area when the distributor or customer arranges the transportation company.

The product is delivered to the customer at the shipping place of YAMAHA’s factory.

The transportation work from loading the product onto the truck to delivery at the local installation place is

the responsible area of the company that arranges the transportation company.

* The quantity check of the accessories shall be conducted before loading the product onto the truck

(when both parties’ responsible personnel attend).

YAMAHA shall not be held responsible for missing or damaged accessory during transportation.

* When suspending the machine by a crane, etc., always use a gondola.

(Attaching suspension wires/belts directly to the machine could cause machine damage.)

7.3 Preparations for power source and air supply source

The customer shall complete the air supply source and power source construction work before the delivery

work. The customer connects the air supply source and power source to the product at the customer’s own

risk. For details, see section 11. "Main Specs.".

7.4 Securing environmental conditions

For details about conditions required for the product installation environment, see "11. Major

specifications" described later. The customer needs to secure various environmental conditions before the

delivery work.

* There are various conditions, such as temperature, humidity, altitude, atmosphere, floor conditions,

ambient noise, ambient illumination, immunity (electro magnetic noise resistance), and emission

(electro magnetic noise emission).