A10011-ASM-T53-EN-Spec-TX-micron-DMS - 第13页
13 Board conveyor I-Placement Alternating placement mode Alternating placement or I-Placement mode Distance of outer conveyor edges: 562 mm, 2 lanes, outer conveyor edges fixed Alternating placement mode Distance of oute…
12
Board conveyor
Technical data
Flexible dual conveyor Dual conveyor in
"single conveyor"
(optional) mode
Board dimensions (length x width) at place-
ment accuracy 20µm/25µm at 3σ
50 mm x 55 mm to
375 mm x 260 mm
50 mm x 55 mm to
375mm x 460mm
Board dimensions (length x width)
a
at place-
ment accuracy 15µm/µm at 3σ
a) Only with SIPLACE TX2i micron 15µm accuracy class and with C&P20 M2
50 mm x 55 mm to
250 mm x 100 mm
n.a.
Stationary conveyor side Outside
Right / right
Left / left
Outside
Automatic electrical width adjustment Standard
PCB thickness
Standard 0.3 mm to 4.5 mm
PCB warpage See page 14
PCB weight
b
Standard
b) The board weight value refers to the weight of the board plus the weight of the components.
Max. 2.0 kg Max. 2.0 kg
Clearance on PCB underside 25 mm
PCB conveyor height
Option
Standard
Option SMEMA
900 mm
930 mm
950 mm
Type of interface SMEMA or IPC-HERMES-9852
Component-free PCB handling edge 3 mm
PCB changeover time
Dual conveyor 1.3 seconds
c
0 seconds
d
c) With the "Convoy Mode" option. Without this option 1.8 seconds.
d) 0 seconds in asynchronous mode
Key information for machines in combination with SIPLACE TX micron:
When setting up a machine (S; F, HS, HF, X or D-Series) next to a SIPLACE TX micron, be aware that there is limited
room between the two machines. In these cases, use a suitable conveyor extension to create room of 0.5m for the
operator between the two machines.
IPC-Hermes-9852
A protocol for advanced development of Industry 4.0 in electronics production
The Hermes Standard, also published as IPC-HERMES-9852, is a non-proprietary open protocol,
based on TCP / IP and XML. This boosts the exchange of PCB-relevant data between the various
machines in the electronics production lines. The Hermes Standard was initiated, developed and
established and is still managed by a group of leading equipment manufacturers, who share their
know-how to achieve a significant step towards advanced process integration. It has been recognized
by IPC as the next generation solution for IPC-SMEMA-9851, normally known as "SMEMA standard".
The founding and defining body The Hermes Standard Initiative is available to all equipment providers
wanting to actively participate in using the benefits of Industry 4.0 for their customers.
13
Board conveyor
I-Placement
Alternating placement mode
Alternating placement or
I-Placement mode
Distance of outer conveyor
edges: 562 mm, 2 lanes, outer
conveyor edges fixed
Alternating placement mode
Distance of outer conveyor
edges: 562 mm, 2 lanes, right
conveyor edges fixed
a
Alternating placement mode
Distance of outer conveyor
edges: 460 mm, dual conveyor
in single conveyor mode, right
conveyor edge fixed
a
Max. 260
Movable conveyor side
Stationary conveyor side
a) The diagram only shows settings with a fixed righthand conveyor edge. A setting with the stationary conveyor
edge on the left is also possible. All dimensions in millimeters.
Max. 260
281
562
Min. 35
281
179
Max. 260
281
Min. 35
Max. 260
562
Max. 460
Machine center
Machine center
Machine center
Adjustable conveyor side position and max. PCB width
Conveyor side position Max. PCB width Distance of fixed side for various fixed side position
settings
Inside Right or left
231 mm 210 mm 462 mm 248.5 mm
268 mm 250 mm 536 mm 285.5 mm
281 mm 260 mm 562 mm 298.5 mm
14
PCB warpage
PCB warpage across the direction of travel
max. 1 % of the PCB diagonal, but not
exceeding 2 mm
PCB warpage on the conveyor
Fixed clamped edge
Movable clamping device
PCB
Fixed clamped edge
Conveyor belt
PCB transport direction
Front board edge
Front board edge
PCB warpage in direction of travel + PCB thickness < 5.5 mm
Bending up of front board edge max. 2.5 mm
Left conveyor belt
Right conveyor belt
PCB transport direction