A10011-ASM-T53-EN-Spec-TX-micron-DMS - 第41页
41 Certificates ESD equipment Analysis of the manufacture, of its Static Control Equipments Examination of Equipments and Materials Analysis – Trainings – Qualifications – Audits European ESD competence centre – Dipl.-In…
40
Certificates
SEMI S2/S8
41
Certificates
ESD equipment
Analysis of the manufacture, of its Static Control Equipments
Examination of Equipments and Materials
Analysis – Trainings – Qualifications – Audits
European ESD competence centre – Dipl.-Ing. Hartmut Berndt
Zum Alten Dessauer 13 – D-01723 KESSELSDORF – Germany
(49)35204 2039-10 – Fax (49)35204 2039-19 – eMail: info@bestat-cc.com – www.bestat-cc.com
Certificate for ESD Equipment
Report - no: 10-446-2019
Company: ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
81379 Munich, Germany
Equipment: Automatic Placement Machine SIPLACE TX-series
Measurements were conducted on October 16
th
2019. The measured results on the automatic
placement machine SIPLACE TX-series fulfil the requirements of IEC 61340-5-1; IEC/TR 61340-5-
2 and ANSI/ESD S20.20-2014
Validation: The Certificate is valid until December 31
st
2021
As conclusion it can be stated that the presented Automatic Placement
Machine SIPLACE TX-series meet the requirements of the standard IEC
61340-5-1, IEC/TR 61340-5-2 and ANSI/ESD S20.20-2014.
Creation of the
European ESD competence centre
report through: Dipl.-Ing. Hartmut Berndt
Zum Alten Dessauer 13
D-01723 KESSELSDORF
Germany
Phone +49 35204 2039-10
Fax +49 35204 2039-19
Kesselsdorf, October 28
th
2019 Dipl.-Ing. Hartmut Berndt
European ESD competence centre is member of ESDA (ESD Association) and ESA
(Electrostatic Society of America) and certified after ISO 9001:2015
Mr. Dipl.-Ing. Hartmut Berndt is additional Expert in the national and International Standard committee of IEC
and DKE. Mr. Berndt is Secretary of the IEC standard committee TC 101 Electrostatics and Leader of the
national ESD expert committee „Fachausschusses 7.3 Elektrostatik at the VDE GMM.
42
Certificates
Clean room