00191174-01.pdf - 第15页

User’s Manual Test Program S ITEST 1 General Functions Software Version 10.xx Edition 03/98 1.4 Head 1 - 3 NOTE By means of the functi on "Store MA-file" only the new ly determ ined valu es of the zero point c …

1 General Functions User’s Manual Test Program SITEST

1.2 Gantry Reference Run Software Version 10.xx Edition 03/98

1 - 2

1.2 Gantry Reference Run

Following the head reference run, the gantry reference run is to be performed. To this end, proceed as fol-

lows:

●

From the main menu select the Gantry refer. run function and press the RETURN key and the START

button. The gantry axes of the active gantry will perform the reference run.

1.3 Saving MA-Data

●

From the main menu select the File Manager option and press the RETURN key. The "File Manager"

menu is displayed on the screen.

Overview of the Functions:

File commands to access the user interface for the manipulation of files

Store MA-file to save newly determined values to the "REAL.MA" file.

●

If you wish to view the contents of the hard disk or a floppy disk, or if you wish to carry out file handling

actions such as copying, renaming, deleting, etc., select the File commands menu option and press the

RETURN key.The "File commands" user interface is opened.

The selection of a directory or a file can be accomplished by using the TAB, RETURN and cursor keys.

The actions (e.g. Copy) displayed on the menu bar can be activated by entering the letter that is shown in

reverse video (e.g. C for Copy).

The source and target paths can be set by entering the number displayed in reverse video.

●

Press the ESC key to return to the "File manager" menu.

●

If you wish to save newly determined calibration data (MA-Data) or a modified machine configuration,

select the Store Ma-file function and press the RETURN key. The data are saved to the "REAL.MA" file.

NOTE

Only

the values for "Zero point cor. value", "Minimal position" and "Maximal position" that were modified in

the "Positions" input menu can be saved with the aid of the main menu option File Manager --> Store

MA-file. All other modified axis data cannot

be saved. They will be reset to the original values upon exiting

from the SITEST program

File manager

File commands

Store MA-file

User’s Manual Test Program SITEST 1 General Functions

Software Version 10.xx Edition 03/98 1.4 Head

1 - 3

NOTE

By means of the function "Store MA-file"

only

the newly determined values of the

zero point correction

and

the

minimum position

and

maximum position

of the traversing range of the x and y-axes can be saved to

the current MA-file "REAL.MA" in the case of a change to the axis machine data. All other axis machine data

that may have been changed will

not

be saved even if the "Store MA-file" function is activated.

As the newly determined values are saved to the "REAL.MA" file, the original values are automatically saved

to the "REAL.ALT" file. If the "REAL.ALT" file does not exist yet, it will be automatically created.

●

Press the ESC key, to return to the SITEST main menu.

1.4 Head

The "Head" menu contains various options for testing the head functions.

●

To test the head functions, select the

Head

option from the main menu and press the RETURN key.

The "Head" menu is displayed on the screen.

Overview of the Functions:

Step star axis to cycle the revolver head by one segment

Remove segment pressing the START button causes the revolver head to advance by one segment

Actuate dp1 to turn the segment by 90°

The motor of the dp1 drive is activated, all Beros are checked.

Actuate dp2 to turn the segment by 90°

The motor of the dp2 drive is activated, all Beros are checked.

Centering no measur. to activate the centering station without any measuring operation taking place

Center measurement to activate the centering station with measuring operation taking place

Pick up cal. tool to pick up the calibration piece which is in pick-up position under the nozzle

Return cal. tool to deposit the calibration piece which is attached to the nozzle

●

Select the desired function and press the RETURN key.

The selected function is now executed.

Head

Step star axis

Remove segment

Actuate dp1

Actuate dp 2

Centering no measur.

Centering measurement

Pick up cal. tool

Return cal. tool

1 General Functions User’s Manual Test Program SITEST

1.5 I/O Ports Software Version 10.xx Edition 03/98

1 - 4

NOTE

Prior to selecting any head functions, the RV-head reference run must have been performed, on SIPLACE 80F

machines the IC-head reference run.

●

Press the ESC key to return to the SITEST main menu.

1.5 I/O Ports

The functions of the "I/O ports" menu serve to selectively interrogate and activate individual bits of the input

and output cards.

●

From the main menu select the "I/O ports" option and press the RETURN key.

The "I/O ports" menu is displayed on the screen.

Overview of the Functions:

Read input to read the selected input bit

Set output to set the selected bit

Combi. IN/OUTPUT to select an input and output port group (group of 8) and status display for each

bit of the selected input and output port group

WARNING

∆

The performance of the "Set output" option may be carried out by adequately qualified personnel only.

●

If you wish to read an input, select the Read input function and press the RETURN key. The "Read input"

menu is displayed on the screen.

I/O ports

Read input

Set output

Combi. IN/OUTPUT