00191174-01.pdf - 第28页
User’s Manual Test Program S ITEST Software Version 10.xx Edition 03/98 2 - II
User’s Manual Test Program SITEST
Software Version 10.xx Edition 03/98
2 - I
Contents
Page
Functions for the Adjustment of the Machine
2.1 Axis Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1
2.2 Functions of the Motor Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6
2.3 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8
2.3.1 Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 9
2.3.2 CRDL Tester. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 10
2.3.3 Component Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 11
2.3.4 Width Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 13
2.3.5 Determination of the Position of the Movable Conveyor Side . . . . . . . . . . . . . . . . . . . . . . . 2 - 14
2.4 Vacuum Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 14
2.5 Continuous Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 15
User’s Manual Test Program SITEST
Software Version 10.xx Edition 03/98
2 - II
User’s Manual Test Program SITEST 2 Functions for the Adjustment of the Machine
Software Version 10.xx Edition 03/98 2.1 Axis Functions
2 - 1
2 Functions for the Adjustment of the
Machine
WARNING
∆
!
∆
!
Some of the functions described in this section are performed with the gantries moving.
Prior to the execution of these functions make sure that neither any part of your body nor any objects are
within the traversing range of the gantries. DANGER OF INJURY.
The inactive gantry must be in the park position.
2.1 Axis Functions
The axis functions are required for the adjustment of the dynamic behavior of the axes. As a rule, the
"Continuous run" function is used for these adjustment procedures. With some adjustments it is necessary to
change the speed during the adjustment procedure using the function "Modify speed".
NOTE
Prior
to the start of the adjustment operations a reference run must be performed for all axes.
This reference run is started by selecting the "RV-Head ref. run" or "IC-head refer. run" function from the
"Head reference run" menu and thereafter the "Gantry refer. run" function from the SITEST main menu.
●
From the SITEST main menu select the Axes option and press the RETURN key.
The "Axes" menu is displayed on the screen.
●
From this menu select the axis to be adjusted and press the RETURN key.
The menu of the selected axis is displayed on the screen.
Axes
x axis
y axis
z axis
star axis
dp1 axis
dp2 axis
z IC axis
d IC axis
only available at
type SIPLACE 80F