00193826-01 - 第146页

6 Component handling User Manual SIPLACE CS 6.4 Component trolley Software version SR. 101.xx06/2003 US Edition 146 6 Fig. 6.4 - 4 Connecting the compresse d air supply for bulk case feeders 6 (1) Coupli ng connec tor fo…

100%1 / 160
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.4 Component trolley
145
It is easy to fit. Use three screws DIN 912, M8x20 (item 3) to fix the compressed air supply (item 2)
to the component feeder table (item 1). The compressed air supply has retaining clips (item 4) on
the back. These secure the bulk case feeder to the component trolley and ensure that the com-
pressed air supply is working properly.
6
Fig. 6.4 - 3 Compressed air supply for bulk case feeders
(1) Component feeder table
(2) Compressed air supply for bulk case feeders
(3) Screw DIN 912, M8x20
(4) Retaining clamp
6 Component handling User Manual SIPLACE CS
6.4 Component trolley Software version SR.101.xx06/2003 US Edition
146
6
Fig. 6.4 - 4 Connecting the compressed air supply for bulk case feeders
6
(1) Coupling connector for compressed air
(2) Coupling socket with supply hose
(3) Compressed air supply distributor for bulk case feeders
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.4 Component trolley
147
6.4.4 Support for the middle tape reel for 3x 8 mm feeders
Type 3x 8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels for the two outer tracks are located between the dividing plates in the tape container. The
middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1) and
– 1 tape reel holder (item 2) for every two feeders
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
Fig. 6.4 - 5 Support for the middle tape reel for 3x 8 mm feeders
(1) Adapter plate
(2) Tape reel holder