00193826-01 - 第149页
User Manual SIPLAC E CS 6 Component han dling Software vers ion SR.101.xx 06/2003 US Edition 6.5 Used tape cutter 149 6.5.2 Inser ting the t ape into the t ape cutter Fig. 6.5 - 2 Inserting the tape into the tape cutter …
6 Component handling User Manual SIPLACE CS
6.5 Used tape cutter Software version SR.101.xx06/2003 US Edition
148
6.5 Used tape cutter
6.5.1 General
The placement system has a used tape cutter at each of the two component trolley locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component trolley.
Æ Empty the waste tape container every day.
Fig. 6.5 - 1 Used tape cutter
(1) Stationary cutting blade
(2) Retainer
(3) Moving cutting blade
(4) Electronic control unit
(5) Short stroke cylinder
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.5 Used tape cutter
149
6.5.2 Inserting the tape into the tape cutter
Fig. 6.5 - 2 Inserting the tape into the tape cutter
(1) Used tape channel
(2) Used tape
(3) To used tape cutter
6 Component handling User Manual SIPLACE CS
6.5 Used tape cutter Software version SR.101.xx06/2003 US Edition
150
PLEASE NOTE
On SIPLACE automatic placement systems, only use the tape feeders specified for these ma-
chines. The used tape channel which removes the used tape is located upstream of the feeders.6
Æ Insert the tape into the feeder as described in the corresponding section.
Æ Guide the used tape into the used tape channel of the cutter as described in Fig. 6.5 - 2.
The used tape guide channels are located upstream of the feeders. They are positioned directly
above the used tape cutters.
The tape is automatically guided through the used tape guide channel into the used tape cutter
below. There, the tape is shredded by the pneumatically-actuated cutting blade. The waste tape
then passes via the waste tape chute into the waste container of the component trolley.
Fig. 6.5 - 3 Pull-out waste tape container in the component trolley
(1) Component trolley
(2) Waste tape container, pull-out