SIPLACE D4 规格说明书英文版 - 第12页
12 Placement Head Technical Data 12-nozzle Collect & Place head CO camera type 28 12-nozzle Collect & Place head CO camera type 29 12-nozz le Collect & Place head CO camera type 38 Component range a a) Please…
11
Placement Head
Standard Functions / Options
12-nozzle Collect&Place head
Standard functions Camera, vacuum sensor, force measurement, PCB war-
page, check, individual recording for each component
Options High-resolution camera, component sensor, short
nozzle, short sleeve, nozzle changers, special nozzles
12
Placement Head
Technical Data
12-nozzle
Collect&Place head
CO camera type 28
12-nozzle
Collect&Place head
CO camera type 29
12-nozzle
Collect&Place head
CO camera type 38
Component range
a
a) Please note that the range of components that can be placed is also affected by the pad geometry,
customer-specific standards, component packaging tolerances and component tolerances
0402 to PLCC44, BGA,
μBGA, flip-chip, TSOP,
QFP, SO to SO32, DRAM
0201
b
to flip-chip, bare
die, PLCC44, BGA,
μBGA, TSOP, QFP, SO to
SO32, DRAM
b) With 0201 package
01005
c
to 16 x 16 mm²
c) With 01005 package
Component specification
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
6 mm
0.5 mm
0.2 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
18.7 x 18.7 mm²
2 g
6 mm
0.3 mm
0.15 mm
0.25 mm
0.14 mm
0.6 x 0.3 mm²
18.7 x 18.7 mm²
2 g
6 mm
0.25 mm
0.1 mm
0.25 mm
0.14 mm
0.4 x 0.2 mm²
16 x 16 mm²
2 g
Programmable set-down
force
2.4 N - 5.0 N 2.4 N - 5.0 N 2.4 N - 5.0 N
Nozzle types 9xx 9xx 9xx
X/Y accuracy
d
d) The accuracy value was measured using the vendor-neutral IPC standard
± 50 μm/3
± 67 μm / 4
± 50 μm/3
± 67 μm / 4
± 50 μm/3
± 67 μm / 4
Angular accuracy ± 0.53°/3
± 0.71°/4
± 0.53°/3
± 0.71°/4
± 0.53°/3
± 0.71°/4
Component range 98% 98.5% 96%
Component camera type 28 29 38
Illumination levels 5 5 5
Possible illumination level
settings
256
5
256
5
256
5
13
Placement Head
Nozzle Changer
Technical data
Dimensions
(length x width x height) 472.5 x 63 x 77 mm³
Number of magazines min. 1 / max. 5,
each with 12 nozzle
holders
Nozzle types 9xx
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changer for the 12-nozzle Collect&Place head
(5 magazines
60 nozzle holders in total)
Magazine for 12
type 9xx nozzles
Description
Nozzle changers increase the
flexibility of placement heads
when processing different
components. The nozzle
configuration can be quickly
modified for new placement
jobs. Exactly defined posi-
tions and the perfect seating
of the nozzle in the garage
guarantee minimal radial
eccentricity at the placement
head.
Up to eight nozzle changers
may be installed on the
SIPLACE D4 machine as an
option.