00900002-01_UM_ASM-ProcessLens_EN - 第70页
4 Setting up and commissioning 4.4 Commissioning the machine 70 Instruction Guide ASM ProcessLens 02/2017
4 Setting up and commissioning
4.4 Commissioning the machine
Instruction Guide ASM ProcessLens 02/2017 69
Fig.43: Position of the shipping brace - Rear side of the machine
1 Shipping brace
4 Setting up and commissioning
4.4 Commissioning the machine
70 Instruction Guide ASM ProcessLens 02/2017
5 Working with the machine
Instruction Guide ASM ProcessLens 02/2017 71
5 Working with the machine
For detailed description, please refer to the following documentations:
●
ProcessLens Recipe Generation [Item No.: 00900063-xx]
●
ProcessLens Technical Training [Item No.: 00900064-xx]
●
SPC Basic Training [Item No.: 00900065-xx]
●
SPC Advanced Training [Item No.: 00900066-xx]
●
Operator Manual ASM ProcessLens [Item No.: 00900067-xx]
CAUTION
Qualified or adequately trained personnel
► No one may start up, operate or otherwise work on the machine unless they have the
relevant qualification. Using the machine not as prescribed, could endanger life and
limb, and result in material damage. You will find further information about this in sec-
tion 1.1.5 "Failure to use as prescribed" [}9].
► The qualification must be proven by means of training courses or instructions for the
personnel. The instructions are to be given by personnel trained and authorized by
ASM SMT Solutions Team. For an overview of the training courses, refer to section
1.2 "Qualification and training of personnel" [}10].