00197490-03_SM_CP20-P-M2_EN保养维护 - 第19页

3 Usability package 3.2 Fitting the usability kit for SIPLACE C&P20P Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 19 Fig.9: Replacing the handle 2 ► Fit the new handle with three fillister …

3 Usability package

3.2 Fitting the usability kit for SIPLACE C&P20P

18 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018

3.2 Fitting the usability kit for SIPLACE C&P20P

Preparation

► Remove the head from the machine. For details about removing and fitting the placement

head, refer to the service manual for your machine.

Fit the head on the head mount [03056231‑xx].

► Make sure that the component sensor protective cap is fitted.

1.1.3 "Safety instructions for the component sensor" [}6]

Conversion

Fig.6: Replacing the safety element 1 (head front and back

sides)

► Remove the old safety element at the top right.

Fig.7: Replacing the safety element 2 (head front and back

sides)

► Fit the new "safety element RO SIPLACE

C&P20P2" [03139206‑xx] with two screws

(ISO4762-M1.6x6‑A2‑70), in place of the old

safety element.

Fig.8: Replacing the handle 1

► Dismantle the old handle. To do this, remove the

three hexagon socket fillister head screws

ISO4762M3x12

 NOTICE!

The old screws can be reused for the new

handle.

3 Usability package

3.2 Fitting the usability kit for SIPLACE C&P20P

Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 19

Fig.9: Replacing the handle 2

► Fit the new handle with three fillister head screws

(hexagon socket cap ISO4762M3x12) to the

head carrier.

Fig.10: Replacing the clamping plates 1

► Remove the old clamping plates.

Fig.11: Replacing the clamping plates 2

► Fit the new clamping plate to the head carrier

with two fillister head screws (hexagon socket

cap ISO4762M2.5x6).

3 Usability package

3.2 Fitting the usability kit for SIPLACE C&P20P

20 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018

Fig.12: Replacing the holding plate 1

► Dismantle the old holding plate FHE.

Fig.13: Replacing the holding plate 2

► Fasten the new holding plate into place with two

screws (ISO4762-M2.5x8‑A2‑70).

Fig.14: Attaching markings 1

► Attach the two U-shaped markings as shown in

the diagram.

First clean the surface with a lint-free cloth,

moistened with ethanol.