00197490-03_SM_CP20-P-M2_EN保养维护 - 第23页
3 Usability package 3.2 Fitting the usability kit for SIPLACE C&P20P Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 23 Fig.20: Fitting the board cover 5 ► Attach the "Board cover assembl…
3 Usability package
3.2 Fitting the usability kit for SIPLACE C&P20P
22 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018
Fig.18: Fitting the board cover 3
► Screw a press stud to each of the four spacer
bolts. Secure the press studs with Loctite 222.
Fig.19: Fitting the board cover 4
To avoid problems with fitting the board cover, check
the cables as follows:
► Pay attention to the position of the cable.
► Make sure that the camera cable on the holding
plate is fastened into place with two cable ties.
3 Usability package
3.2 Fitting the usability kit for SIPLACE C&P20P
Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 23
Fig.20: Fitting the board cover 5
► Attach the "Board cover assembly SIPLACE
C&P20P" [03113667‑xx] onto the press studs.
This completes the assembly of the usability kit.
3 Usability package
3.2 Fitting the usability kit for SIPLACE C&P20P
24 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018